Multitech MTPSR1-120 manual Installation -1. cont’d Step Procedure

Page 15

Chapter 2 - Installation

Chapter 2 - Installation

Table 2-1. (cont’d.)

Step Procedure

5.If a cable modem, DSL modem, or your Internet LAN is being used, no cable connection will be made to the RS232/V.35 connector on the back of the ProxyServer.

If the RS232/V.35 connector on the ProxyServer is going to be connected to a WAN device (i.e., connecting your secure (private) LAN to an ISP, connect one end of an RS232 or V.35 interface cable to the RS232/V.35 connector on the back of the ProxyServer. Connect the other end of this cable to the WAN device.

6.Turn on power to the ProxyServer by placing the ON/OFF switch on the back panel to the ON position. Wait for the Fail LED on the ProxyServer to go OFF before proceeding. This may take a couple of minutes to go OFF.

At this time your ProxyServer is completely cabled. Proceed to Chapter 3 to load the Firewall software.

15

Image 15

Contents User Guide Dual Ethernet ProxyServer Model MTPSR1-120TRADEMARK User GuideRecord of Revisions RevisionDescription PatentsChapter 4 - Firewall Software Chapter 2 - InstallationChapter 3 - Software Loading and Configuration Chapter 1 - Introduction and DescriptionIndex Chapter 5 - Remote Configuration and ManagementChapter 6 - Warranty, Service and Tech Support AppendixesChapter 1 - Introduction and Description Preview of this Guide Chapter 2 - InstallationChapter 3 - Software Loading and Configuration IntroductionAppendixes Chapter 5 - Remote Configuration and ManagementChapter 6 - Warranty, Service and Tech Support Chapter 4 - ProxyServer SoftwareWAN Link PowerFront Panel Description ETHERNET 1 andPower Connector RS232/V.35 ConnectorEthernet 1 and 2 10Base-T Connectors Command ConnectorWAN Link SpecificationsCommand Port Ethernet PortsChapter 2 - Installation Safety Warnings Unpacking Your ProxyServerFigure 2-1. Unpacking Figure 2-3. Shunt Positions V.35 Shunt ProcedureStep Procedure Figure 2-2. Cabinet Mounting ScrewCabling Procedure Step Procedure Cabling Your ProxyServerFigure 2-4. Cable Connections Chapter 2 - Installation Table 2-1. cont’d Step Procedure Dual Ethernet ProxyServer User Guide Chapter 3 - Software Loading and Configuration Loading Your Software 7. The “Do you want to download default setup?” dialog is displayed Chapter 3 - Software Loading and ConfigurationDHCP Relay Agent does not apply IP Port ConfigurationDefault WAN Link Configuration 19. The Writing Setup dialog box is displayed as the setup configuration is written to the ProxyServer Chapter 4 - Firewall Software Private LAN Configuration 1 - Cable/DSL ModemFigure 4-1. Cable/DSL Modem Configuration Typical ApplicationsChapter 4 - Firewall Software Private LAN Configuration 2 - Existing Dual-LAN with RouterFigure 4-2. Existing Dual-LAN with Router Configuration Internet Services NetworkFigure 4-3. New Dual-LAN with T1 DSU Configuration Configuration 3 - New Dual-LAN with T1 DSUThe Internet LAN Port Parameters group is either configured with the DHCP Client option active, enabling the ISP to dynamically provide the registered Internet IP addresses, or with the DHCP Client option disabled if a static IP addressing scheme is provided by the ISP. If the DHCP Client field is deactivated the static IP Address of 204.26.12.10 is then entered and the WAN option is checked in the Internet Gateway Parameters group Configuration Port Setup Download Default SetupFirewall Program Group Download Firmware Update Uninstall Firewall ConfigurationWAN Device Configuration Firewall Configuration Changing IP Parameters Net Mask - Enter the Subnetwork Mask for the WAN port in this field Changing WAN Port Parameters Adding Proxy Applications Enabling the DHCP Server Chapter 5 - Remote Configuration and Management Enabling PPP/SLIPEnabling PPP Enabling SLIP Statistics ApplicationsFiltering Chapter 5 - Remote Configuration and Management Connect the modem to your local telephone line Modem-Based Remote Configuration ProcedureClick OK when you are satisfied with your selections Windows Sockets Compliant TCP/IP Stack LAN-Based Remote Configuration Procedure8 Click Exit when the downloading is complete Telnet Remote ManagementFirewall Configuration Firewall Management MenuThe Firewall Management Menu provides two basic options Firewall Configuration and WAN Device Configuration. A further option enables you to close the Telnet session from this menu by pressing the Esc key WEB Management Chapter 6 - Warranty, Service and Tech Support On-line Warranty Registration Limited WarrantyChapter 6 - Warranty, Service and Technical Support Tech SupportRecording ProxyServer Information Service ATTN SERVICE OR REPAIRSMULTI-TECH SYSTEMS, INC 2205 WOODALE DRIVE MOUNDS VIEW, MINNESOTA If you know the file name The Multi-Tech BBSTo Log on to the Multi-Tech BBS To Download a Fileftp//ftp.multitech.com About the Multi-Tech Fax-Back ServiceAbout CompuServe About the InternetAppendixes Dual Ethernet ProxyServer User Guide Appendix A - TCP/IP Description Internet Protocol IP Index F 20, 33 Configuration 2 - Existing Dual-LAN with Router26Configuration 3 - New Dual-LAN with T1 DSU Secured LAN Port Parameters