Dual Ethernet ProxyServer User Guide
LAN-Based Remote Configuration Procedure
Windows Sockets Compliant TCP/IP Stack
The configuration program requires a Windows Sockets compliant TCP/IP stack. TCP/IP protocol software must be installed and functional before the configuration program can be used.
1You must assign an Internet (IP) address for the PC and for each node that will be managed by the configuration program. Refer to the protocol software documentation for instructions on how to set the IP addresses.
Once you have completed this step, you should be able to use the protocol Ping command for the PC host name. You should also test the network interface configuration by Pinging another TCP/IP device that is connected to the network.
2Install the Proxy Server software on the local PC. When installed click Start Programs Firewall Configuration Port Setup, or double click on the Configuration Port Setup icon in the Firewall program group.
3The Firewall Setup dialog box is displayed.
Verify that the Communication Type field is set IP.
In the Router IP Address field, enter the IP Address of the remote ProxyServer.
4Click OK when you are satisfied with your selections.
5Run the Proxy Server Configuration program. Click Start Programs Firewall Firewall Configuration, or double click on the Firewall Configuration icon in the Firewall program group.
44