Multitech MTPSR1-120 manual Changing WAN Port Parameters, Dual Ethernet ProxyServer User Guide

Page 34

Changing WAN Port Parameters

Dual Ethernet ProxyServer User Guide

Changing WAN Port Parameters

In order to change the WAN port parameters of a DCE device connected to the RS232/V.35 connector on the ProxyServer, click on the WAN button in the Firewall Setup menu. The WAN Port Setup dialog box is displayed.

From this dialog, you can configure the parameters of the WAN port. To enable the WAN port, click on the Port Enable check box.

The Mode group allows you to configure the WAN interface to match the DCE device connected to the RS232/V.35 port on the ProxyServer. Options include Asynchronous or Synchronous mode. If asynchronous is chosen, you can select the proper Baud speed. If synchronous is chosen, External Clocking or Internal Clocking must be selected.

The Connection Method group allows you to configure the port as Direct Connect/Leased Line, Answering or Dialing, and allows you to select the Modem Type and Dial Number for the DCE device.

For a detailed description of each field, refer to the on-line help provided with your Firewall software.

34

Image 34

Contents Dual Ethernet ProxyServer Model MTPSR1-120 User GuidePatents User GuideRecord of Revisions RevisionDescription TRADEMARKChapter 1 - Introduction and Description Chapter 2 - InstallationChapter 3 - Software Loading and Configuration Chapter 4 - Firewall SoftwareAppendixes Chapter 5 - Remote Configuration and ManagementChapter 6 - Warranty, Service and Tech Support IndexChapter 1 - Introduction and Description Introduction Chapter 2 - InstallationChapter 3 - Software Loading and Configuration Preview of this GuideChapter 4 - ProxyServer Software Chapter 5 - Remote Configuration and ManagementChapter 6 - Warranty, Service and Tech Support AppendixesETHERNET 1 and PowerFront Panel Description WAN LinkCommand Connector RS232/V.35 ConnectorEthernet 1 and 2 10Base-T Connectors Power ConnectorEthernet Ports SpecificationsCommand Port WAN LinkChapter 2 - Installation Unpacking Your ProxyServer Safety WarningsFigure 2-1. Unpacking Figure 2-2. Cabinet Mounting Screw V.35 Shunt ProcedureStep Procedure Figure 2-3. Shunt PositionsCabling Your ProxyServer Cabling Procedure Step ProcedureFigure 2-4. Cable Connections Chapter 2 - Installation Table 2-1. cont’d Step Procedure Dual Ethernet ProxyServer User Guide Chapter 3 - Software Loading and Configuration Loading Your Software Chapter 3 - Software Loading and Configuration 7. The “Do you want to download default setup?” dialog is displayedIP Port Configuration DHCP Relay Agent does not applyDefault WAN Link Configuration 19. The Writing Setup dialog box is displayed as the setup configuration is written to the ProxyServer Chapter 4 - Firewall Software Typical Applications Configuration 1 - Cable/DSL ModemFigure 4-1. Cable/DSL Modem Configuration Private LANChapter 4 - Firewall Software Internet Services Network Configuration 2 - Existing Dual-LAN with RouterFigure 4-2. Existing Dual-LAN with Router Configuration Private LANConfiguration 3 - New Dual-LAN with T1 DSU Figure 4-3. New Dual-LAN with T1 DSU ConfigurationThe Internet LAN Port Parameters group is either configured with the DHCP Client option active, enabling the ISP to dynamically provide the registered Internet IP addresses, or with the DHCP Client option disabled if a static IP addressing scheme is provided by the ISP. If the DHCP Client field is deactivated the static IP Address of 204.26.12.10 is then entered and the WAN option is checked in the Internet Gateway Parameters group Download Default Setup Configuration Port SetupFirewall Program Group Uninstall Firewall Configuration Download Firmware UpdateWAN Device Configuration Firewall Configuration Changing IP Parameters Net Mask - Enter the Subnetwork Mask for the WAN port in this field Changing WAN Port Parameters Adding Proxy Applications Enabling the DHCP Server Enabling PPP/SLIP Chapter 5 - Remote Configuration and ManagementEnabling PPP Enabling SLIP Applications StatisticsFiltering Chapter 5 - Remote Configuration and Management Modem-Based Remote Configuration Procedure Connect the modem to your local telephone lineClick OK when you are satisfied with your selections LAN-Based Remote Configuration Procedure Windows Sockets Compliant TCP/IP Stack8 Click Exit when the downloading is complete Remote Management TelnetFirewall Management Menu Firewall ConfigurationThe Firewall Management Menu provides two basic options Firewall Configuration and WAN Device Configuration. A further option enables you to close the Telnet session from this menu by pressing the Esc key WEB Management Chapter 6 - Warranty, Service and Tech Support Limited Warranty On-line Warranty RegistrationTech Support Chapter 6 - Warranty, Service and Technical SupportRecording ProxyServer Information ATTN SERVICE OR REPAIRS ServiceMULTI-TECH SYSTEMS, INC 2205 WOODALE DRIVE MOUNDS VIEW, MINNESOTA To Download a File The Multi-Tech BBSTo Log on to the Multi-Tech BBS If you know the file nameAbout the Internet About the Multi-Tech Fax-Back ServiceAbout CompuServe ftp//ftp.multitech.comAppendixes Dual Ethernet ProxyServer User Guide Appendix A - TCP/IP Description Internet Protocol IP Index F Secured LAN Port Parameters Configuration 2 - Existing Dual-LAN with Router26Configuration 3 - New Dual-LAN with T1 DSU 20, 33