Chapter 4 - Firewall Software
The WAN Port Parameters group is used to configure the WAN port, if enabled. The WAN port parameters are established when the ProxyServer is directly connected to the Internet via the RS232/V.35 connector on the back of the unit.
ISP Assigns Dynamic Address - Normally, the ISP assigns a dynamic address when the port comes up. If this is not the case, disable this option and assign a valid registered Internet address in the IP Address field.
IP Address - If dynamic addressing is enabled, this field is dynamically assigned by the ISP. If static addressing is enabled, enter a valid Internet address in this field.
Net Mask - Enter the Subnetwork Mask for the WAN port in this field.
The Internet Gateway Parameters group is used to configure the Internet gateway if used by the Internet LAN (LAN 2) port.
WAN - If a connection to the Internet Services Network is provided via a DCE device connected to the RS232/V.35 port on the back of the ProxyServer, then this option must be selected.
Internet LAN - If a connection to the Internet Services Network is provided through the Internet LAN (LAN 2), then this option must be selected. If the Internet LAN is configured as a DHCP Client, then the IP address will be dynamically assigned by the ISP. If the DHCP Client option is disabled, then a valid registered Internet address must be entered in the IP Address field.
IP Address - If the Internet LAN is configured as a DHCP Client, this address will be dynamically assigned by the ISP. If the DHCP Client option is disabled, the a valid registered Internet address must be entered in the IP Address field.
33