Chapter 5 - Remote Configuration and Management
Verify that the Communication Type is set for COM Port and the Select Port field is set for the COM port of your local PC.
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number of the remote ProxyServer.
If your Modem Initialization String, Initialization Response, or Connect Response values are different than the defaults in the dialog box, refer to your modem user documentation and change the default values to match your modem.
Click OK when you are satisfied with your selections.
6Run the Proxy Server Configuration program. Click Start Programs Firewall Firewall Configuration, or double click on the Firewall Configuration icon in the Firewall program group.
7The Dialing Router dialog box is displayed while software is dialing the remote ProxyServer.
8The Reading Setup dialog box is displayed.
9The Firewall Setup menu is displayed. This is the dialog box of the remote ProxyServer. Refer to the
10After you have changed the configuration of the remote ProxyServer, click Download Setup to update the configuration. The remote ProxyServer will be brought down, the new configuration written to the unit, and the unit will reboot.
11Click Exit when the downloading is complete.
12The Hangup connection with Router? dialog box is displayed Click Yes to disconnect the phone connection to the remote site.
13If the same telephone number is not going to be used again in the immediate future, you may want to remove it from the Port Setup dialog box.
14At the remote site, reconnect the ProxyServer to the serial port of the PC and from the Firewall program group double click on the Firewall Configuration icon to verify that the ProxyServer is running.
43