GSA Operations
Document Number:
Disk Recovery Procedures
The following procedures may be used to restore the GSA Unit software to its original configuration. The entire process will take about 10 minutes to complete.
CAUTION: These procedures will destroy all existing data on your hard disk!
•There are three ways to perform the recovery of a GSA Unit system.
•If the computer’s power is on, open the
•If the computer’s power is off, paper clip the
•If the computer’s power is off, turn on the computer’s power. When the computer’s bios posts (text first appears on the screen) open the
•Turn the system power on.
•If you do not want to continue press N. Press Y to continue the process and replace all the data on the hard drive.
•The system will reboot when recovery is complete.
•If the system tries to perform the recovery again, simply remove the ASD System Image Recovery
50