Grandstream Networks 486 user manual Call Feature has to be set to YES in web configuration

Page 11

HandyTone-486 User Manual

Grandstream Networks, Inc.

Call Flashing. When in conversation, user can also flash to the third party by pressing flash(or Flash Hook for old style phones) button to get a dial tone and then dial the third party number.

5.2.4Blind Transfer

Assume that call party A and B are in conversation. A wants to Blind Transfer B to C:

1.A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone.

2.Then A dials *87 then dials C’s number, and then #(or wait for 4 seconds)

3.A can hang up.

NOTES:

Call Feature has to be set to YES in web configuration page.

A can hold on to the phone and await one of the three following behaviors:

A quick confirmation tone (temporarily using the call waiting indication tone) follows by a dial tone. This indicates the transfer has been successful (transferee has received a 200 OK from transfer target). At this point, you can either hang up or make another call.

A quick busy tone followed by a restored call (On supported platforms only). This means the transferee has received a 4xx response for the INVITE and we will try to recover the call. The busy tone is just to indicate to the transferor that the transfer has failed.

Busy tone keeps playing. This means we have failed to receive the second NOTIFY from the transferee and decide to time out. Note: this does not indicate the transfer has been successful, nor does it indicate the transfer has failed. When transferee is a client that does not support the second NOTIFY, this will be the case. In bad network scenarios, this could also happen, although the transfer may have been completed successfully.

5.2.5Attended Transfer

Assume that call party A and B are in conversation. A wants to Attend Transfer B to C:

11

Image 11
Contents For Firmware Version HandyTone-486Table of Contents Welcome Top View Side Views InstallationSafety Compliances What is Included in the PackageProduct Overview Key FeaturesModel HandyTone-486 Hardware SpecificationGet Familiar with Key Pad and Voice Prompt Basic OperationsMake Phone Calls Voice Prompt with option 47, then Call Feature has to be set to YES in web configuration Call Features Pstn Pass Through/Life Line LED Light Pattern Indication Sending and Receiving FaxHttp//192.168.2.1 Configuration GuideConfiguring HandyTone-486 WAN IP through Voice Prompt Configuring HandyTone-486 with Web BrowserHttp//HandyTone-IP-Address NAT/DHCP Server Information & Configuration Basic SettingsIP Address PasswordEnd User Address LAN Subnet Mask Time ZoneDaylight TimeSoftware Version MAC AddressWAN IP Address Product ModelDaylight Savings NAT Mapped IPOther Status of ATAAdvanced User Configuration Advanced Options MWI Outbound Proxy Admin PasswordAuthenticate ID SIP ServerPreferred Vocoder Authentication PasswordFax Mode NameRegister Expiration Unregister on RebootNo Key Entry timeout Firmware UpgradeLock keypad update UpgradeEnable Call Features Disable Call WaitingSyslog Level Pstn Access CodeSyslog Server Click to relogin Configuration through a Central Server Upgrade through Tftp Software UpgradeUpgrade through Http Grandstream Networks, Inc Restore Factory Default Setting
Related manuals
Manual 28 pages 3.61 Kb