Grandstream Networks, Inc. |
•‘*’ functions similar to ‘↓’ key of
•‘#’ returns back to main MENU
•‘9’ is similar to ENTER key in many cases to confirm an option
•All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP address. Once all digits are accumulated, it will automatically process them
•For IP address input, ignore the dot and key in the digit directly, add 0 before octet with less than three digits. e.g.: IP: 192.168.1.10, key in: 192 168 001 010
•Key entry cannot be deleted but the phone may prompt error once it is detected
5.2Make Phone Calls
5.2.1Calling phone or extension numbers
There are currently two methods to make an extension number call:
•Dial the numbers directly and wait for 4 (default) seconds. This default parameter can be adjusted in the web configuration page.
•Dial the numbers directly, and press # (assuming that “use #” as dial key is selected in web configuration).
Other functions available during the call are
5.2.2Direct IP calls
Direct IP calling allows two parties, that is, a HandyTone with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy. This kind of VoIP calls can be made between two parties if:
•Both HandyTone ATA and other VoIP Device(i.e., another HandyTone ATA or Budgetone SIP phone or other VoIP unit) have public IP addresses, or
•Both HandyTone ATA and other VoIP Device are on the same LAN using private or public IP addresses, or
•Both HandyTone ATA and other VoIP Device can be connected through a router using public or private IP addresses (with necessary port forwarding or DMZ).
To make a direct IP to IP call, first pick up the analog phone or turn on the speakerphone on the analog phone, then follow Section 4.1 with voice prompt 47, followed by the
9