Grandstream Networks 486 user manual End User, Password, IP Address

Page 18

HandyTone-486 User Manual

Grandstream Networks, Inc.

DMZ IP:

Port Forwarding:

WAN port WAN port WAN port WAN port WAN port WAN port WAN port WAN port

0

0

0

0

0

0

0

0

LAN IP

LAN port

LAN IP

LAN port

LAN IP

LAN port

LAN IP

LAN port

LAN IP

LAN port

LAN IP

LAN port

LAN IP

LAN port

LAN IP

LAN port

Update Cancel

Reboot

0

0

0

0

0

0

0

0

Protocol

Protocol

Protocol

Protocol

Protocol

Protocol

Protocol

Protocol

"UDP Only"

"UDP Only"

"UDP Only"

"UDP Only"

"UDP Only"

"UDP Only"

"UDP Only"

"UDP Only"

All Rights Reserved Grandstream Networks, Inc. 2005

End User

This contains the password to access the Web Configuration

Password

Menu. This field is case sensitive with max. 25 characters

IP Address

There are 2 modes where the HandyTone ATA can operate:

 

- If DHCP mode is enabled, then all the field values for the Static

 

IP mode are not used (even though they are still saved in the

 

Flash memory.) The HandyTone ATA will acquire its IP address

 

from the first DHCP server it discovers from the LAN it is

 

connected.

 

To use PPPoE feature set the PPPoE account settings here if

 

connect the box to DSL modem. The HandyTone will attempt to

 

establish a PPPoE session if any of the PPPoE fields is set. In this

 

mode, the WAN side web access is disabled and TFTP upgrade

 

for firmware is not feasible and HTTP upgrade is only available

 

solution.

 

- If Static IP mode is selected, then the IP address, Subnet Mask,

 

Default Router IP address, DNS Server 1 (primary), DNS Server

 

2 (secondary) fields will need to be configured. These fields are

 

reset to zero by default.

18

Image 18
Contents HandyTone-486 For Firmware VersionTable of Contents Welcome Installation Top View Side ViewsWhat is Included in the Package Safety CompliancesKey Features Product OverviewHardware Specification Model HandyTone-486Basic Operations Get Familiar with Key Pad and Voice PromptMake Phone Calls Voice Prompt with option 47, then Call Feature has to be set to YES in web configuration Call Features Pstn Pass Through/Life Line Sending and Receiving Fax LED Light Pattern IndicationConfiguring HandyTone-486 with Web Browser Configuration GuideConfiguring HandyTone-486 WAN IP through Voice Prompt Http//192.168.2.1Http//HandyTone-IP-Address Basic Settings NAT/DHCP Server Information & ConfigurationPassword End UserIP Address Time Time ZoneDaylight Address LAN Subnet MaskProduct Model MAC AddressWAN IP Address Software VersionStatus of ATA NAT Mapped IPOther Daylight SavingsAdvanced User Configuration Advanced Options MWI SIP Server Admin PasswordAuthenticate ID Outbound ProxyName Authentication PasswordFax Mode Preferred VocoderFirmware Upgrade Unregister on RebootNo Key Entry timeout Register ExpirationDisable Call Waiting UpgradeEnable Call Features Lock keypad updatePstn Access Code Syslog ServerSyslog Level Click to relogin Configuration through a Central Server Software Upgrade Upgrade through HttpUpgrade through Tftp Grandstream Networks, Inc Restore Factory Default Setting
Related manuals
Manual 28 pages 3.61 Kb