Grandstream Networks, Inc. | ||||
LAN Subnet Mask | Sets the LAN subnet mask. Default value is 255.255.255.0 | |||
LAN | DHCP | Base | Base IP for the LAN port, which function as a Gateway for the | |
IP: |
|
| subnet. Default value is 192.168.2.1 |
|
DHCP | IP | Lease | Value is set in units of hours. Default value is 120hr (5 Days.) | |
Time: |
|
| The time IP address are assigned to the LAN clients | |
DMZ IP: |
| Forward all WAN IP traffic to a specific IP address if no | ||
|
|
| matching port is used by | |
|
|
| port forwarding. |
|
Port Forwarding: | Allow the user to forward a matching (TCP/UDP) port to a | |||
|
|
| specific LAN IP address with a specific (TCP/UDP) port. | |
6.2.3Advanced User Configuration
To login to the Advanced User Configuration page, follow the instruction in section
6.2.1to get to the following login page. The password is case sensitive and the factory default password for Advanced User is ‘admin’.
Advanced User configuration page includes not only the end user configuration, but also some advanced configuration such as SIP configuration, Codec selection, NAT
22