Grandstream Networks 486 NAT Mapped IP, Other, Status of ATA, Daylight Savings, Address

HandyTone-486 User Manual			Grandstream Networks, Inc.
NAT Mapped IP		WAN side public IP if connected to LAN of a SOHO router.
Other	Statistical	Self explainable, see the page displayed.
Status of ATA
BASIC
SETTINGS:
End User		This contains the password to access the Web Configuration
Password		Menu. This field is case sensitive with max. 25 characters
IP Address		There are 2 modes where the HandyTone ATA can operate:
		- If DHCP mode is enabled, then all the field values for the Static
		IP mode are not used (even though they are still saved in the
		Flash memory.) The HandyTone ATA will acquire its IP address
		from the first DHCP server it discovers from the LAN it is
		connected.
		To use PPPoE feature set the PPPoE account settings here if
		connect the box to DSL modem. The HandyTone will attempt to
		establish a PPPoE session if any of the PPPoE fields is set. In this
		mode, the WAN side web access is disabled and TFTP upgrade
		for firmware is not feasible and HTTP upgrade is only available
		solution.
		- If Static IP mode is selected, then the IP address, Subnet Mask,
		Default Router IP address, DNS Server 1 (primary), DNS Server
		2 (secondary) fields will need to be configured. These fields are
		reset to zero by default.
Time Zone		This parameter controls how the displayed date/time will be
		adjusted according to the specified time zone.
Daylight	Savings	This parameter controls whether the displayed time will be
Time		daylight savings time or not. If set to Yes, then the displayed time
		will be 1 hour ahead of normal time.

Cloned WAN MAC Allow the user to set a specific MAC address. Set in Hex format

Address:

21