Grandstream Networks 486 user manual Click to relogin

Page 30

HandyTone-486 User Manual

Grandstream Networks, Inc.

6.2.4Saving the Configuration Changes

Once a change is made, the user should click the “Update” button in the Configuration Menu. The HandyTone ATA will then display the following screen to confirm that the changes have been saved.

Grandstream Device Configuration

STATUS BASIC SETTINGS ADVANCED SETTINGS

Your configuration changes have been saved.

They will take effect on next reboot.

All Rights Reserved Grandstream Networks, Inc. 2005

6.2.5Rebooting the HandyTone-486 from remote

The user/administrator of the HandyTone-486 can remotely reboot the HandyTone ATA by pressing the “Reboot” button at the bottom of the configuration page. Once done, the following screen will be displayed to indicate that rebooting is underway.

Grandstream Device Configuration

The device is rebooting now...

You may relogin by clicking on the link below in 30 seconds.

Click to relogin

All Rights Reserved Grandstream Networks, Inc. 2005

At this point, the user can relogin to the HandyTone ATA after waiting for about 30 seconds.

30

Image 30

Contents HandyTone-486 For Firmware VersionTable of Contents Welcome Installation Top View Side ViewsWhat is Included in the Package Safety CompliancesKey Features Product OverviewHardware Specification Model HandyTone-486Basic Operations Get Familiar with Key Pad and Voice PromptMake Phone Calls Voice Prompt with option 47, then Call Feature has to be set to YES in web configuration Call Features Pstn Pass Through/Life Line Sending and Receiving Fax LED Light Pattern IndicationConfiguring HandyTone-486 with Web Browser Configuration GuideConfiguring HandyTone-486 WAN IP through Voice Prompt Http//192.168.2.1Http//HandyTone-IP-Address Basic Settings NAT/DHCP Server Information & ConfigurationPassword End UserIP Address Time Time ZoneDaylight Address LAN Subnet MaskProduct Model MAC AddressWAN IP Address Software VersionStatus of ATA NAT Mapped IPOther Daylight SavingsAdvanced User Configuration Advanced Options MWI SIP Server Admin PasswordAuthenticate ID Outbound ProxyName Authentication PasswordFax Mode Preferred VocoderFirmware Upgrade Unregister on RebootNo Key Entry timeout Register ExpirationDisable Call Waiting UpgradeEnable Call Features Lock keypad updatePstn Access Code Syslog ServerSyslog Level Click to relogin Configuration through a Central Server Software Upgrade Upgrade through HttpUpgrade through Tftp Grandstream Networks, Inc Restore Factory Default Setting

Related manuals

Manual 28 pages 3.61 Kb