Grandstream Networks, Inc. |
Disable Call-
Waiting:
Send DTMF:
DTMF Payload Type:
Send Flash Event: FXS Impedance:
Caller ID Scheme:
Onhook Voltage:
No | Yes |
|
|
| via RTP (RFC2833) | via SIP INFO | |
101 |
|
|
|
No | Yes | (Flash will be sent as a DTMF event if set to Yes) | |
current setting is " 600 Ohm (North America)"
current setting is " Bellcore"
current setting is " 36V"
Polarity Reversal:
NTP Server:
Send Anonymous:
Lock keypad update:
No 
Yes
time.nist.gov
No 
Yes
No 
Yes
(reverse polarity upon call establishment and termination) 
(URI or IP address)
(caller ID will be blocked if set to Yes)
(configuration update via keypad is disabled if set to Yes)
Special Feature:
WAN Side HTTP
Access:
PSTN Access Code:
Syslog Server:
current setting is "Standard"
No | Yes (WAN side access to http server will be rejected if set to No) |
| (key pattern to use the PSTN line, default is "*00") |
Syslog Level: | current setting is "NONE" |
|
| Update | Cancel Reboot |
| All Rights Reserved Grandstream Networks, Inc. 2005 | |
Admin Password | Administrator password. Only administrator can configure the “Advanced Settings” page. | |
| Password field is purposely blanked for security reason after clicking update and saved. The | |
| maximum password length is 25 characters. | |
SIP Server | IP address or Domain name provided by VoIP service provider | |
Outbound Proxy | IP address or Domain name of Outbound Proxy, or Media Gateway, or Session Border | |
Controller. Used by ATA for firewall or NAT penetration in different network environment. If | ||
| symmetric NAT is detected, STUN will not work and ONLY outbound proxy will provide | |
| solution for it. |
|
SIP User ID | User account information, provided by VoIP service provider (ITSP), usually has the form of | |
| digit similar to phone number or actually a phone number | |
Authenticate ID | ID used for authentication, usually same as SIP user ID, but could be different and decided by | |
| ITSP. |
|
25