Sierra Wireless X HSUPA manual Interface Port Pin-Outs, Serial Port

Specifications

•Power

Interface Port Pin-Outs

Serial Port

Unused CTS (Clear to Send) < -

RTS (Request to Send) - > DSR (Data to Send) < -

9	5		< - > GND (Ground)
	4
8			< - DTR Data Terminal Ready)
	3
7			< -	Rx (Receive)
	2	- >		Tx (Transmit)
6
	1
			- > DCD (Data Carrier Detect)

Figure 2-1: Serial Port Diagram: Female DB-9 DCE (not to scale)

I/O Port

Note: The Pin-Out diagram shows external view looking at PinPoint X connector in front face-plate of device. Pin 1 is lower right.

.

22	21	20	19	18	17		16	15	14	13	12
DIN1	GND	DIN3	GND	Relay		1	Rsv	NC	AIN1	GNDAIN3
				NO1Com1
DIN2GND		DIN4	GND	Relay 2			Rsv	NC	AIN2	GND	AIN4
				NO2Com2
11	10	9	8	7	6		5	4	3	2	1

Figure 2-2: PinPoint X I/O Port Diagram (not to scale)

1.	Analog Input 4	12.	Analog Input 3
2.	Analog Ground	13.	Analog Ground
3.	Analog Input 2	14.	Analog Input 1
4.	No Connect	15.	No Connect
5.	Reserved for future use	16.	Reserved for future use
6.	Com2 (for use with #7)	17.	Com1 (for use with #18)
7.	Normal Open Relay	18.	Normal Open Relay
8.	GND	19.	GND
9.	Digital Input 4	20.	Digital Input 3

Rev 4.0 Oct.09 13