Sierra Wireless X HSUPA manual Documentation, Tools and Reference Documents

Page 16

 

 

Introduction to the PinPoint X

 

 

The PinPoint X has an embedded radio module, also made

 

 

by Sierra Wireless, Inc. There are two firmware programs

 

 

on the device—one stored on the controller board of the

 

 

PinPoint X and one on the radio module.

 

 

The firmware was loaded into the radio module and con‐

 

 

troller board when the PinPoint X was assembled. As new

 

 

versions of the software and firmware are released, they

 

 

are posted at www.sierrawireless.com.

 

 

Documentation

 

 

This PinPoint X User Guide describes how to:

 

 

Install the PinPoint X hardware.

 

 

Connect the radio antennas.

 

 

Connect a notebook computer and other input/output

 

 

(I/O) devices.

 

 

Interpret the LEDs on the PinPoint X and the indicators in

 

 

the ACEview software.

 

 

This User Guide is provided as a PDF (Portable Document

 

 

Format) file on the installation CD or from the Sierra Wireless

 

 

support website.

 

 

Tools and Reference Documents

 

 

 

User Guide

 

Description

 

 

 

ALEOS User Guide

This

document discusses software configuration in ACEmanager and about

 

the

explains different ALEOS features.

 

 

 

ACEview User Guide

This

document explains the use of this utility tools which is used to view and

 

monitor the connection state of a Sierra Wireless AirLink device.

 

 

ACEnet User Guide

This document explains the use of ACEnet services for remote management

 

of Sierra Wireless AirLink device.

 

 

 

Rev 4.0 Oct.09

10

Image 16
Contents User Guide Important Notice Safety and Hazards Limitation Liability Patents Copyright Trademarks Contact Information Revision HistoryContents Activating PinPoint X on your cellular provider Introduction to the PinPoint HsupaAleos ACEwareSimplified Deployment Monitor and ControlModem Doctor Connecting to your cellular providerSteps of a connection Cellular Dynamic vs. Static IP AddressesCommunication Hsupa HsupaConnection methods UmtsVirtual serial port NetworkingIPSec Software ApplicationsEvents Reporting Documentation Tools and Reference DocumentsSpecifications Features and BenefitsTechnology BandsPower Consumption @12V DC DimensionsLED Indicators Standards/ApprovalsSerial Port Interface Port Pin-OutsPort Power Connector Power Connector not to scaleInstalling the SIM Activating PinPoint X on your Cellular providerBefore you start Cellular Account RequiredOpening the SIM Slot Remove the SIM from the cardEjecting the SIM tray Tools RequiredInsert the SIM into the Tray Finishing the SIM installationInsert the Tray and SIM Configuring the APN Hardware Installation PinPoint Dust, etcConnecting to Power GPS Antenna Placement for a VehicleConnecting to a Computer or other Device Ignition Sense power connectorSerial Indicator Lights Rssi LED Ranges RSSI/Signal LED Status Ranges of Rssi dBmMounting Light PatternsFront Capturing External Events Inputs, Relay Outputs, and Power 5 StatusAnalog Inputs Digital Inputs Relay OutputsConnecting devices to the I/O Port Rev 4.0 Oct.09 Inputs, Relay Outputs, and Power StatusWiring Color Corospondance Monitoring and Setting the I/O Power Modes and InformationGetting Immediate Reports Using RAP Wiring the PinPoint X for Power Effect on Modem StateMonitoring Power-In Voltage PinPoint X Hsupa 20080311