Sierra Wireless X HSUPA manual Insert the SIM into the Tray, Insert the Tray and SIM

Page 23

Activating PinPoint X on your cellular provider

c.

5.Insert the SIM into the Tray

a.Place the SIM into the tray and gently press to click it into place.

Figure 3-3: Empty SIM Tray and a Tray with a Sample SIM

6.Insert the Tray and SIM

a.Slide the tray back into the modem.

b.Gently press the SIM to click it into place.

Tip: The top of the card faces the bottom of the modem.

Figure 3-4: Inserting the SIM

7. Finishing the SIM installation

Replace the cover to prevent dust or other unwanted particles from entering the PinPoint X. Once the cover is replaced, the installation is complete.


Rev 4.0 Oct.09						17
Rev 4.0 Oct.09						17

Image 23

Contents User Guide Important Notice Safety and Hazards Limitation Liability Patents Copyright Trademarks Revision History Contact InformationContents Activating PinPoint X on your cellular provider Hsupa Introduction to the PinPointACEware AleosMonitor and Control Simplified DeploymentSteps of a connection Connecting to your cellular providerModem Doctor Dynamic vs. Static IP Addresses CellularHsupa Communication HsupaUmts Connection methodsIPSec NetworkingVirtual serial port Events Reporting ApplicationsSoftware Tools and Reference Documents DocumentationBands SpecificationsFeatures and Benefits TechnologyStandards/Approvals Power Consumption @12V DCDimensions LED IndicatorsPort Interface Port Pin-OutsSerial Port Power Connector not to scale Power ConnectorCellular Account Required Installing the SIMActivating PinPoint X on your Cellular provider Before you startTools Required Opening the SIM SlotRemove the SIM from the card Ejecting the SIM trayInsert the Tray and SIM Finishing the SIM installationInsert the SIM into the Tray Configuring the APN Dust, etc Hardware Installation PinPointGPS Antenna Placement for a Vehicle Connecting to PowerIgnition Sense power connector Connecting to a Computer or other DeviceSerial Rssi LED Ranges RSSI/Signal LED Status Ranges of Rssi dBm Indicator LightsLight Patterns MountingFront Analog Inputs Inputs, Relay Outputs, and Power 5 StatusCapturing External Events Relay Outputs Digital InputsRev 4.0 Oct.09 Inputs, Relay Outputs, and Power Status Connecting devices to the I/O PortWiring Color Corospondance Getting Immediate Reports Using RAP Power Modes and InformationMonitoring and Setting the I/O Power Effect on Modem State Wiring the PinPoint X forMonitoring Power-In Voltage PinPoint X Hsupa 20080311