Sierra Wireless X HSUPA manual Hardware Installation PinPoint, Dust, etc

Page 25

4: Hardware Installation of the	4
PinPoint X

•Connecting to Power

•Connecting to a Computer or other Device

•Indicator Lights

•Mounting

Note: During installation, please		Your PinPoint X should be mounted in a position that allows
be sure that the cables are		easy access for the cables so they are not bent, constricted, in
secure but do not bear any		close proximity to high amperage, or exposed to extreme
additional weight that could		temperatures. The LEDs on the front panel should be visible
loosen the connector from the		for ease of operational verification. You should ensure that
unit.		there is adequate airflow around the modem but that it is kept
		free from direct exposure to the elements, such as sun, rain,

		dust, etc.

		Caution: The PinPoint X is in a hardened case and designed for use
		in industrial and extreme environments. However, unless you are
		using cables expressly designed for such environments, they can fail
		if exposed to the same conditions the PinPoint X can withstand.

	GPS	Ethernet	Serial	Primary Cellular

		Power	USB
	Recive Diversity
		Figure 4-1: PinPoint X Connectors
		Antennas selected should not exceed a maximum gain of 5 dBi
Note: This device is not		Antennas selected should not exceed a maximum gain of 5 dBi
intended for use within close		under standard installation configuration. In more complex
proximity of the human body.		installations (such as those requiring long lengths of cable and/
Antenna installation should		or multiple connections), it’s imperative that the installer
provide for at least a 20 CM		follow maximum dBi gain guidelines in accordance with the
separation from the operator.


Rev 4.0 Oct.09						19
Rev 4.0 Oct.09						19

Image 25

Contents User Guide Important Notice Safety and Hazards Limitation Liability Patents Copyright Trademarks Revision History Contact InformationContents Activating PinPoint X on your cellular provider Hsupa Introduction to the PinPointACEware AleosMonitor and Control Simplified DeploymentModem Doctor Connecting to your cellular providerSteps of a connection Dynamic vs. Static IP Addresses CellularHsupa Communication HsupaUmts Connection methodsVirtual serial port NetworkingIPSec Software ApplicationsEvents Reporting Tools and Reference Documents DocumentationFeatures and Benefits SpecificationsTechnology BandsDimensions Power Consumption @12V DCLED Indicators Standards/ApprovalsSerial Port Interface Port Pin-OutsPort Power Connector not to scale Power ConnectorActivating PinPoint X on your Cellular provider Installing the SIMBefore you start Cellular Account RequiredRemove the SIM from the card Opening the SIM SlotEjecting the SIM tray Tools RequiredInsert the SIM into the Tray Finishing the SIM installationInsert the Tray and SIM Configuring the APN Dust, etc Hardware Installation PinPointGPS Antenna Placement for a Vehicle Connecting to PowerIgnition Sense power connector Connecting to a Computer or other DeviceSerial Rssi LED Ranges RSSI/Signal LED Status Ranges of Rssi dBm Indicator LightsLight Patterns MountingFront Capturing External Events Inputs, Relay Outputs, and Power 5 StatusAnalog Inputs Relay Outputs Digital InputsRev 4.0 Oct.09 Inputs, Relay Outputs, and Power Status Connecting devices to the I/O PortWiring Color Corospondance Monitoring and Setting the I/O Power Modes and InformationGetting Immediate Reports Using RAP Power Effect on Modem State Wiring the PinPoint X forMonitoring Power-In Voltage PinPoint X Hsupa 20080311