Hardware Installation of the PinPoint X
radio communications regulations of the Federal Communica‐ tions Commission (FCC), Industry Canada, or your country’s regulatory body (if used outside the US).
Your PinPoint X will work with most cellular antennas with a connector. Connect the primary antenna or primary RF cable directly to the antenna connector on the back of the PinPoint X.
Tip: When using a cable to an antenna placed away from the modem, minimize the length of your cable. All gain from a more advantageous antenna placement can be lost with a long cable to the modem.
GPS Antenna
Your PinPoint X will work with most standard active GPS antennas. Connect the GPS antenna or cable directly to the threaded SMA connector.
Mount the GPS Antenna in the vehicle. The less the cable is wrapped and bound together, the better it will perform. Place it on the roof, or on the dash, or rear panel where it has a good view of the sky (greater than a 90 angle view of the sky).
There are three options for antenna mounts:
•Magnetic roof‐mount
•Through glass‐mount
•Permanent mount
Figure 4-2: GPS Antenna Placement for a Vehicle
Connecting to Power
Your PinPoint X can be used with either DC or AC, with the appropriate power adapter. DC cables and AC adapters are available as optional accessories in addition to the one included with your PinPoint X.
|
|
|
|
|
|
|
Rev 4.0 Oct.09 |
|
|
|
|
| 20 |
|
|
|