Sierra Wireless 20080605 manual Power Connector not to scale

Page 19

Specifications

Power Connector

* Configuration terminology in ACEmanager

Figure 2-1: Power Connector (not to scale)

Warning: Explosion Hazard - Do not disconnect equipment unless power has been switched off or the area is known to be non-hazardous.

Note: Raven XE I/O Port 4 is software configurable.


Rev 1.0 Oct.09						13
Rev 1.0 Oct.09						13

Image 19

Contents User Guide Contents Contents Important Notice Safety and Hazards Limitation Liability Patents Copyright Trademarks Revision History Contact InformationAleos Introduction to the Raven XEACEware AleosMonitor and Control Simplified DeploymentModem Doctor Connecting to your cellular providerSteps of a connection Dynamic vs. Static IP Addresses Connection methods CommunicationVirtual serial port NetworkingIPSec Software ApplicationsEvents Reporting Tools and Reference Documents DocumentationSpecifications Host Interfaces DimensionsLED Indicators Standards/ApprovalsPower Reset Button Power Connector not to scale Power ConnectorCellular Account Required Installing the SIMActivating Raven XE on your Cellular provider Before you startRemove the SIM from the card Opening the CaseTools Required Insert the SIM Finishing the SIM installationConfiguring the APN Dust, etc Hardware Installation of the RavenDigital 1/0 Port Connecting to PowerEthernet Connecting to a Computer or other DeviceUSB Indicator LightsLight Patterns Rssi LED Ranges RSSI/Signal LED Ranges of Rssi dBm StatusOptional Mounting Bracket MountingMounting bracket installation Hardware Installation of the Raven XE Rev 1.0 Oct.09 Choose a name and icon for your connection Connecting the Raven XEUsing a Terminal Application with AT Commands ACEmanagerConnect To Connect ToConnected Type AT and press Enter. You should get a reply of OK or AT Command