Sierra Wireless 20080605 manual Insert the SIM, Finishing the SIM installation

Page 22

Activating Raven XE on your cellular provider

Note: The card and SIM may be a different color than these examples.

Rev 1.0 Oct.09

Figure 3-2: Sample of the SIM card

3.Insert the SIM

a.Gently press the SIM card to click it into place.

Tip: The top of the card faces the bottom of the modem.

Figure 3-3: Insert SIM in to the modem

4. Finishing the SIM installation

When the faceplate is replaced and secured, the installation of the SIM is complete. Secure the front of the Raven XE with the screws.

16

Image 22

Contents User Guide Contents Contents Important Notice Safety and Hazards Limitation Liability Patents Copyright Trademarks Contact Information Revision HistoryIntroduction to the Raven XE AleosAleos ACEwareSimplified Deployment Monitor and ControlModem Doctor Connecting to your cellular providerSteps of a connection Dynamic vs. Static IP Addresses Communication Connection methodsVirtual serial port NetworkingIPSec Software ApplicationsEvents Reporting Documentation Tools and Reference DocumentsSpecifications Standards/Approvals DimensionsLED Indicators Host InterfacesPower Reset Button Power Connector Power Connector not to scaleBefore you start Installing the SIMActivating Raven XE on your Cellular provider Cellular Account RequiredRemove the SIM from the card Opening the CaseTools Required Finishing the SIM installation Insert the SIMConfiguring the APN Hardware Installation of the Raven Dust, etcConnecting to Power Digital 1/0 PortConnecting to a Computer or other Device EthernetIndicator Lights USBRssi LED Ranges RSSI/Signal LED Ranges of Rssi dBm Status Light PatternsMounting Optional Mounting BracketMounting bracket installation Hardware Installation of the Raven XE Rev 1.0 Oct.09 ACEmanager Connecting the Raven XEUsing a Terminal Application with AT Commands Choose a name and icon for your connectionConnect To Connect ToConnected Type AT and press Enter. You should get a reply of OK or AT Command