Sierra Wireless 20080605 manual Type AT and press Enter. You should get a reply of OK or

Page 35

Connecting the Raven XE

Figure 5-3: HyperTerminal : TCP/IP connected

Figure 5-4: HyperTerminal : connected

a.If you are prompted for a password, enter 12345 (default password).

Tip: You will not be prompted for a password if you connect using a

COM port.

b.Type AT and press Enter. You should get a reply of “OK” or “0”.


Rev 1.0 Oct.09						29
Rev 1.0 Oct.09						29

Image 35

Contents User Guide Contents Contents Important Notice Safety and Hazards Limitation Liability Patents Copyright Trademarks Revision History Contact InformationAleos Introduction to the Raven XEACEware AleosMonitor and Control Simplified DeploymentSteps of a connection Connecting to your cellular providerModem Doctor Dynamic vs. Static IP Addresses Connection methods CommunicationIPSec NetworkingVirtual serial port Events Reporting ApplicationsSoftware Tools and Reference Documents DocumentationSpecifications Host Interfaces DimensionsLED Indicators Standards/ApprovalsPower Reset Button Power Connector not to scale Power ConnectorCellular Account Required Installing the SIMActivating Raven XE on your Cellular provider Before you startTools Required Opening the CaseRemove the SIM from the card Insert the SIM Finishing the SIM installationConfiguring the APN Dust, etc Hardware Installation of the RavenDigital 1/0 Port Connecting to PowerEthernet Connecting to a Computer or other DeviceUSB Indicator LightsLight Patterns Rssi LED Ranges RSSI/Signal LED Ranges of Rssi dBm StatusOptional Mounting Bracket MountingMounting bracket installation Hardware Installation of the Raven XE Rev 1.0 Oct.09 Choose a name and icon for your connection Connecting the Raven XEUsing a Terminal Application with AT Commands ACEmanagerConnect To Connect ToConnected Type AT and press Enter. You should get a reply of OK or AT Command