Sierra Wireless 20080605 manual Opening the Case, Remove the SIM from the card, Tools Required

Page 21

Activating Raven XE on your cellular provider

Tools Required

•Small Phillips screw driver ‐ The Phillips screw driver is the one which is also called a plus (+) or X screw driver.

•Slim stylus ‐ A PDA stylus, an unbent paperclip, or other such item.

Figure 3-1: Faceplate

Warning: Explosion Hazard. Do Not remove or replace Plug-in Modules unless power has been disconnected or the area is known to be free of ignitible concentrations of flammable Gasses or vapors.

1.Opening the Case

a.Unplug the Raven XE power and all cables.

b.Using a small phillips head screw driver, remove the screws on the front of the Raven XE.

2.Remove the SIM from the card

a.Carefully remove the SIM card from the card you received from your cellular provider.


Rev 1.0 Oct.09						15
Rev 1.0 Oct.09						15

Image 21

Contents User Guide Contents Contents Important Notice Safety and Hazards Limitation Liability Patents Copyright Trademarks Revision History Contact InformationAleos Introduction to the Raven XEACEware AleosMonitor and Control Simplified DeploymentConnecting to your cellular provider Modem DoctorSteps of a connection Dynamic vs. Static IP Addresses Connection methods CommunicationNetworking Virtual serial portIPSec Applications SoftwareEvents Reporting Tools and Reference Documents DocumentationSpecifications LED Indicators DimensionsStandards/Approvals Host InterfacesPower Reset Button Power Connector not to scale Power ConnectorActivating Raven XE on your Cellular provider Installing the SIMBefore you start Cellular Account RequiredOpening the Case Remove the SIM from the cardTools Required Insert the SIM Finishing the SIM installationConfiguring the APN Dust, etc Hardware Installation of the RavenDigital 1/0 Port Connecting to PowerEthernet Connecting to a Computer or other DeviceUSB Indicator LightsLight Patterns Rssi LED Ranges RSSI/Signal LED Ranges of Rssi dBm StatusOptional Mounting Bracket MountingMounting bracket installation Hardware Installation of the Raven XE Rev 1.0 Oct.09 Using a Terminal Application with AT Commands Connecting the Raven XEACEmanager Choose a name and icon for your connectionConnect To Connect ToConnected Type AT and press Enter. You should get a reply of OK or AT Command