Scientific Atlanta DPX213 manual WebSTAR Cable Modem Back Panel, Back Panel Components

WebSTAR Cable Modem Back Panel

Back Panel Components

The follow illustration describes the back panel components of the cable modem.

1	12 VDC
2		LINE 2
3		1
		LINE

4	RESET
5	ETHERNET
6	USB
7	CABLE

T10267

1POWER - Connects the cable modem to the DC output of the AC power adapter that is provided with your cable modem

Note: Only use the power cord and the AC power adapter that are provided with your cable modem.

2LINE 2 – RJ-11 telephone port connects to home telephone wiring to conventional telephones or fax machines

3LINE 1 – RJ-11 telephone port connects to home telephone wiring to conventional telephones or fax machines

4RESET – Reset-to-Default button (Factory Reset)

CAUTION: This button is for maintenance purposes only. Do not use unless instructed to do so by your cable or telephone service provider!

5ETHERNET - RJ-45 Ethernet port connects to the Ethernet port on your PC

6USB - 12 Mbps USB port connects to the USB port on your PC

7CABLE IN - F-Connector connects to an active cable signal from your cable service provider

CAUTION: Do not connect your PC to both the Ethernet and USB ports at the same time.

Note: You can connect two separate PCs to the cable modem at the same time by connecting one to the Ethernet port and one to the USB port. See Install the Cable Modem, next in this guide.

10 WebSTAR Model DPX213 VoIP DOCSIS Cable Modem User's Guide 4001231 Rev A