Sierra Wireless MP595W Receive diversity, Connection methods, Supported Cdma radio frequencies

Page 15

Introducing the MP Modem

The ability of the MP modem to obtain service and the type of service obtained in any area is determined by several factors:

Network proximity and 1xEV-DO CDMA availability To obtain service, you must be within the coverage area of a network operating in one of the radio frequency bands supported by the MP modem. The type of connection depends on the service available in that area. For example, there are areas with 1x service in which 1xEV‐DO has not yet been implemented.

Roaming If you are within the coverage of a network operated by a different service provider, your ability to obtain service depends on whether a roaming agreement exists between your service provider and the one operating your current local network. There may be additional fees for roaming service. Contact your reseller or service provider for information.

Account provisions Your account may restrict usage of certain networks or may limit your connection time or data transmission.

Supported CDMA radio frequencies

CDMA networks operate on two sets of radio frequency bands. The MP 595 modem is a dual‐band product that operates on both bands:

1900 MHz (also called the PCS, or Personal Communica‐ tions Services, band)

800 MHz (Cellular band)

Receive diversity

The MP 595 modem supports receive diversity for improved signal reception. Receive diversity uses two antennas to enhance the quality of the signal, but does not extend the MP modem’s coverage area.

Connection methods

You can connect the MP modem to a USB, Ethernet (RJ45), or serial (DB9) port on a computer. When connected to a USB or Ethernet port, the MP modem behaves like a network card.

When connected to a serial port, the MP modem behaves like a dial‐up modem.

 

 

 

 

 

 

 

Rev 1.4 Draft Mar.08

 

 

 

 

 

15

 

 

 

Image 15
Contents User Guide Page Important Notice Safety and Hazards Limitation Liability Qualcomm 3G Patents CopyrightTrademarks Contact InformationRevision History AirLink MP595 / MP595W Modem User Guide 2130795 Contents MP Modem Operation Configuring the Router Functions Support and Warranty Regulatory Information AirLink MP595 / MP595W Modem User Guide 2130795 Introducing the MP Modem Cdma account and coverage About CdmaReceive diversity Connection methodsSupported Cdma radio frequencies VPN support for Rnap Virtual serial portSoftware DocumentationMP Modem Manager AirLink MP595 / MP595W Modem User Guide Getting Started Plan your MP modem installation Where do you want to install your MP modem?What type of connections do you plan to use? Getting Started Package contents Required equipmentAdditional required equipment System requirements MP modem accessoriesAirLink MP595 / MP595W Modem User Guide 2130795 Hardware and Software Installation Installation overviewMP modem housing Connector panel Overview of installation stepsGPS and I/O options Mounting the MP modem Install the MP modemMount the MP modem Select a location for the MP modemMounting the MP modem. Arrows indicate the mounting holes Ground the MP modemMain RF antenna Mount the antennas and install the cablesGPS antenna AP antenna MP 595W onlyAntenna locations Install the antennas and cables Vehicle installation Install the power harnessPower connector Power connector Molex pinoutsIgnition sense options Ignition sense on/off wiringCrimp terminals Ground the power harnessPower connections Correct wire splicingConnect the MP modem to computer cable Office installationInstall the USB, Ethernet or serial cable Serial connector DB9 pinoutsInstall the software Activate your accountPort connections Automated activation Test the systemActivation Wizard Manual activationTurning the MP modem on and off MP Modem OperationLED operation Status indicatorsReset the MP modem 3G Watcher software3G Watcher Help Establishing connections Launching 3G Watcher3G Watcher window NAT mode Configuring the Router FunctionsNAT mode Non-NAT modeMode MP modem networking basics in NATFile and resource sharing over LAN Static IP and TCP/UDP port forwarding in NAT modeEnable the router Set up static IP addressesSet up TCP/UDP port forwarding AirLink MP595 / MP595W Modem User Guide 2130795 Overview Configuring the Wireless Access PointChange the password optional Unlock MP modem configurationSet the Ssid Enable the wireless access pointConfigure the security settings Configure security on the client computers Reset the MP modem to factory defaultsAirLink MP595 / MP595W Modem User Guide 2130795 GPS configuration and reporting Configuring the MP Modem to Report GPS and I/O DataGPS display in 3G Watcher GPS protocols and commandsGPS Taip quick reference Device installation and configurationConnector pinouts Port specificationsDigital input devices Example panic button connections A button wired to Pin 4 digital input and Pin 10 GroundAnalog input devices Digital output devicesExample analog sensor connections Configuration using AT or 3G Watcher commandsExample Analog input setupDigital I/O setup AirLink MP595 / MP595W Modem User Guide 2130795 Route data to a server Configure the MP modem toReport frequency timers Sending Data to Your Network ApplicationTmsumregind Sending Data to Your Network Application IP Addressing Monitoring and Tracking configurationProblem created by Network Address Translation Retrieve the Unique Mobile Device ID Solutions to the NAT problemSupport and Warranty WarrantyTechnical support AirLink MP595 / MP595W Modem User Guide 2130795 Regulatory, radio frequency and electrical specifications Technical SpecificationsWeight and dimensions Environmental specificationsGPS specifications Host interfacesOther interfaces Wireless access point specifications Port characteristicsWPA2 AirLink MP595 / MP595W Modem User Guide 2130795 Canada Regulatory InformationImportant Note FCC CautionApproved antennas Numerics IndexMTP Index AirLink MP595 / MP595W Modem User Guide 2130795

MP595W, MP595 specifications

The Sierra Wireless MP595 and MP595W are robust industrial-grade multi-network routers designed to ensure reliable and high-speed connectivity in a wide range of applications. Both models leverage advanced technologies to meet the demands of IoT (Internet of Things), M2M (Machine-to-Machine), and remote network management, making them ideal for various sectors, including transportation, utility, and smart city initiatives.

One of the standout features of the MP595 and MP595W is their dual-SIM capability. This functionality allows users to connect to two different mobile networks simultaneously, providing added reliability and redundancy. In scenarios where one network experiences failures or inadequate performance, the router can seamlessly switch to the secondary SIM. This ensures continuous connectivity, which is crucial for critical applications where downtime can result in significant losses.

Both models support a full range of cellular technologies, including 4G LTE and 3G, enabling high-speed connections with the flexibility to adapt to different network conditions. The MP595W variant offers additional capabilities, including built-in Wi-Fi, allowing users to set up a local wireless network and connect multiple devices easily.

Furthermore, these routers feature advanced security mechanisms, supporting VPN (Virtual Private Network) protocols and firewall functionalities. This ensures secure data transmission and protects sensitive information from potential threats, making them suitable for enterprise-level applications.

The user-friendly management interface enables easy configuration and monitoring. Sierra Wireless provides comprehensive tools and APIs that facilitate remote management, allowing users to manage and update the router's settings from anywhere, thereby reducing maintenance costs and time.

The routers also come equipped with multiple Ethernet ports, allowing for direct wired connections to equipment and devices. This versatility makes them suitable for a variety of setups, from simple installations to more complex network configurations.

With their rugged design, the MP595 and MP595W are built to withstand harsh environmental conditions, making them perfect for outdoor deployments. They are designed to operate across a wide temperature range, ensuring consistent performance in extreme weather.

In conclusion, the Sierra Wireless MP595 and MP595W are powerful, versatile, and secure solutions for organizations needing robust mobile connectivity. Their advanced features and reliability make them indispensable in achieving seamless communication across various industrial applications.