Sierra Wireless MP595W manual Reset the MP modem to factory defaults

Page 53

Configuring the Wireless Access Point

Configure security on the client computers

For each computer on the network, the network authenticity and data encryption must match the security settings used by the MP modem. Be sure to deselect the “Key provided automatically (by server)” option.

Reset the MP modem to factory defaults

You can reset the MP modem to the factory defaults using AT commands or using the reset button.

Note: It’s a good idea to have a record of the current settings before reverting to the factory settings.

To record the current settings:

1.In Watcher, select Tools > AT Commands and enter the AT!MPCFGDUMP?, AT!MPCFGDUMP?1 and AT!MPCFGDUMP?2 commands to generate a list of current settings.

To reset the MP modem to its factory default settings using AT commands:

1.Enter the AT!MPNVDEF command.

To reset the MP modem to its factory default settings using the reset button:

1.Watch the LEDs and follow this sequence:

a.Press and hold the reset button. The LEDs all turn red.

b.Release the reset button. The LEDs all turn green and then all go out.

When the LEDs all go out, repeat step a and step b until you have pressed the reset button three times.

After you release the reset button for the third time, all the LEDs turn green and then all go out. Then the two center LEDs (Tx and Rx) turn red. This indicates that the MP modem has restored the NV settings to the factory defaults. The LEDs then proceed with their regular start‐ up sequence.

 

 

 

 

 

 

 

Rev 1.4 Draft Mar.08

 

 

 

 

 

53

 

 

 

Image 53
Contents User Guide Page Important Notice Safety and Hazards Limitation Liability Qualcomm 3G Patents CopyrightRevision History TrademarksContact Information AirLink MP595 / MP595W Modem User Guide 2130795 Contents MP Modem Operation Configuring the Router Functions Support and Warranty Regulatory Information AirLink MP595 / MP595W Modem User Guide 2130795 Introducing the MP Modem Cdma account and coverage About CdmaSupported Cdma radio frequencies Receive diversityConnection methods VPN support for Rnap Virtual serial portMP Modem Manager SoftwareDocumentation AirLink MP595 / MP595W Modem User Guide Getting Started What type of connections do you plan to use? Plan your MP modem installationWhere do you want to install your MP modem? Getting Started Additional required equipment Package contentsRequired equipment System requirements MP modem accessoriesAirLink MP595 / MP595W Modem User Guide 2130795 MP modem housing Hardware and Software InstallationInstallation overview GPS and I/O options Connector panelOverview of installation steps Mount the MP modem Install the MP modemSelect a location for the MP modem Mounting the MP modemMounting the MP modem. Arrows indicate the mounting holes Ground the MP modemMain RF antenna Mount the antennas and install the cablesAntenna locations GPS antennaAP antenna MP 595W only Install the antennas and cables Power connector Install the power harnessPower connector Molex pinouts Vehicle installationIgnition sense options Ignition sense on/off wiringPower connections Ground the power harnessCorrect wire splicing Crimp terminalsConnect the MP modem to computer cable Office installationInstall the USB, Ethernet or serial cable Serial connector DB9 pinoutsPort connections Install the softwareActivate your account Activation Wizard Test the systemManual activation Automated activationTurning the MP modem on and off MP Modem OperationLED operation Status indicators3G Watcher Help Reset the MP modem3G Watcher software 3G Watcher window Establishing connectionsLaunching 3G Watcher NAT mode Configuring the Router FunctionsNAT mode Non-NAT modeMode MP modem networking basics in NATEnable the router Static IP and TCP/UDP port forwarding in NAT modeSet up static IP addresses File and resource sharing over LANSet up TCP/UDP port forwarding AirLink MP595 / MP595W Modem User Guide 2130795 Overview Configuring the Wireless Access PointChange the password optional Unlock MP modem configurationSet the Ssid Enable the wireless access pointConfigure the security settings Configure security on the client computers Reset the MP modem to factory defaultsAirLink MP595 / MP595W Modem User Guide 2130795 GPS configuration and reporting Configuring the MP Modem to Report GPS and I/O DataGPS display in 3G Watcher GPS protocols and commandsGPS Taip quick reference Device installation and configurationDigital input devices Connector pinoutsPort specifications Example panic button connections A button wired to Pin 4 digital input and Pin 10 GroundAnalog input devices Digital output devicesExample analog sensor connections Configuration using AT or 3G Watcher commandsExample Analog input setupDigital I/O setup AirLink MP595 / MP595W Modem User Guide 2130795 Report frequency timers Configure the MP modem toSending Data to Your Network Application Route data to a serverTmsumregind Sending Data to Your Network Application IP Addressing Monitoring and Tracking configurationProblem created by Network Address Translation Retrieve the Unique Mobile Device ID Solutions to the NAT problemTechnical support Support and WarrantyWarranty AirLink MP595 / MP595W Modem User Guide 2130795 Regulatory, radio frequency and electrical specifications Technical SpecificationsWeight and dimensions Environmental specificationsOther interfaces GPS specificationsHost interfaces Wireless access point specifications Port characteristicsWPA2 AirLink MP595 / MP595W Modem User Guide 2130795 Canada Regulatory InformationApproved antennas Important NoteFCC Caution Numerics IndexMTP Index AirLink MP595 / MP595W Modem User Guide 2130795

MP595W, MP595 specifications

The Sierra Wireless MP595 and MP595W are robust industrial-grade multi-network routers designed to ensure reliable and high-speed connectivity in a wide range of applications. Both models leverage advanced technologies to meet the demands of IoT (Internet of Things), M2M (Machine-to-Machine), and remote network management, making them ideal for various sectors, including transportation, utility, and smart city initiatives.

One of the standout features of the MP595 and MP595W is their dual-SIM capability. This functionality allows users to connect to two different mobile networks simultaneously, providing added reliability and redundancy. In scenarios where one network experiences failures or inadequate performance, the router can seamlessly switch to the secondary SIM. This ensures continuous connectivity, which is crucial for critical applications where downtime can result in significant losses.

Both models support a full range of cellular technologies, including 4G LTE and 3G, enabling high-speed connections with the flexibility to adapt to different network conditions. The MP595W variant offers additional capabilities, including built-in Wi-Fi, allowing users to set up a local wireless network and connect multiple devices easily.

Furthermore, these routers feature advanced security mechanisms, supporting VPN (Virtual Private Network) protocols and firewall functionalities. This ensures secure data transmission and protects sensitive information from potential threats, making them suitable for enterprise-level applications.

The user-friendly management interface enables easy configuration and monitoring. Sierra Wireless provides comprehensive tools and APIs that facilitate remote management, allowing users to manage and update the router's settings from anywhere, thereby reducing maintenance costs and time.

The routers also come equipped with multiple Ethernet ports, allowing for direct wired connections to equipment and devices. This versatility makes them suitable for a variety of setups, from simple installations to more complex network configurations.

With their rugged design, the MP595 and MP595W are built to withstand harsh environmental conditions, making them perfect for outdoor deployments. They are designed to operate across a wide temperature range, ensuring consistent performance in extreme weather.

In conclusion, the Sierra Wireless MP595 and MP595W are powerful, versatile, and secure solutions for organizations needing robust mobile connectivity. Their advanced features and reliability make them indispensable in achieving seamless communication across various industrial applications.