Sierra Wireless MP595W manual Regulatory Information, Canada

Page 79

11: Regulatory Information

Note: Unauthorized modifica- tions or changes not expressly approved by Sierra Wireless, Inc. could void compliance with regulatory rules, and thereby your authority to use this equipment.

Canada

To ensure that the MP modem meets Health Canada’s Safety Code 6 requirements, a separation distance of at least 20 cm (8 inches) must be maintained between the modem’sMain RF antenna and the body of the user and any nearby persons at all times and in all applications and uses.

Additionally, the maximum antenna gain in the PCS band, including cable loss, must not exceed 4.15 dBi, and in the Cellular band, must not exceed 5.1 dBi, to comply with Industry Canada and Health Canada regulations limiting both maximum RF output power and human exposure to RF radiation.

For the MP 595W modem, the maximum gain for the AP antenna must not exceed 3 dBi, and the AP antenna must be at least 20 cm away from the Main RF antenna.

U.S.A.

To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain, including cable loss, in the PCS band, must not exceed 4.15 dBi, and in the Cellular band, must not exceed 5.1 dBi.

The Main RF Main RF antenna must be mounted such that there is a separation distance of at least 20 cm (8 inches) between the Main RF antenna and the body of the user or any nearby persons.

For the MP 595W modem, the maximum gain for the AP antenna must not exceed 3 dBi, and the AP antenna must be professionally installed with a separation distance of at least 20 cm away from the Main RF antenna, per FCC Part 15 require‐ ments.

 

 

 

 

 

 

 

Rev 1.4 Draft Mar.08

 

 

 

 

 

79

 

 

 

Page 78 Page 80
Image 79
Page 78 Page 80
Contents User Guide Page Important Notice Safety and Hazards Limitation Liability Qualcomm 3G Patents CopyrightContact Information TrademarksRevision History AirLink MP595 / MP595W Modem User Guide 2130795 Contents MP Modem Operation Configuring the Router Functions Support and Warranty Regulatory Information AirLink MP595 / MP595W Modem User Guide 2130795 Introducing the MP Modem Cdma account and coverage About CdmaConnection methods Receive diversitySupported Cdma radio frequencies VPN support for Rnap Virtual serial portDocumentation SoftwareMP Modem Manager AirLink MP595 / MP595W Modem User Guide Getting Started Where do you want to install your MP modem? Plan your MP modem installationWhat type of connections do you plan to use? Getting Started Required equipment Package contentsAdditional required equipment System requirements MP modem accessoriesAirLink MP595 / MP595W Modem User Guide 2130795 Installation overview Hardware and Software InstallationMP modem housing Overview of installation steps Connector panelGPS and I/O options Mounting the MP modem Install the MP modemMount the MP modem Select a location for the MP modemMounting the MP modem. Arrows indicate the mounting holes Ground the MP modemMain RF antenna Mount the antennas and install the cablesAP antenna MP 595W only GPS antennaAntenna locations Install the antennas and cables Vehicle installation Install the power harnessPower connector Power connector Molex pinoutsIgnition sense options Ignition sense on/off wiringCrimp terminals Ground the power harnessPower connections Correct wire splicingConnect the MP modem to computer cable Office installationInstall the USB, Ethernet or serial cable Serial connector DB9 pinoutsActivate your account Install the softwarePort connections Automated activation Test the systemActivation Wizard Manual activationTurning the MP modem on and off MP Modem OperationLED operation Status indicators3G Watcher software Reset the MP modem3G Watcher Help Launching 3G Watcher Establishing connections3G Watcher window NAT mode Configuring the Router FunctionsNAT mode Non-NAT modeMode MP modem networking basics in NATFile and resource sharing over LAN Static IP and TCP/UDP port forwarding in NAT modeEnable the router Set up static IP addressesSet up TCP/UDP port forwarding AirLink MP595 / MP595W Modem User Guide 2130795 Overview Configuring the Wireless Access PointChange the password optional Unlock MP modem configurationSet the Ssid Enable the wireless access pointConfigure the security settings Configure security on the client computers Reset the MP modem to factory defaultsAirLink MP595 / MP595W Modem User Guide 2130795 GPS configuration and reporting Configuring the MP Modem to Report GPS and I/O DataGPS display in 3G Watcher GPS protocols and commandsGPS Taip quick reference Device installation and configurationPort specifications Connector pinoutsDigital input devices Example panic button connections A button wired to Pin 4 digital input and Pin 10 GroundAnalog input devices Digital output devicesExample analog sensor connections Configuration using AT or 3G Watcher commandsExample Analog input setupDigital I/O setup AirLink MP595 / MP595W Modem User Guide 2130795 Route data to a server Configure the MP modem toReport frequency timers Sending Data to Your Network ApplicationTmsumregind Sending Data to Your Network Application IP Addressing Monitoring and Tracking configurationProblem created by Network Address Translation Retrieve the Unique Mobile Device ID Solutions to the NAT problemWarranty Support and WarrantyTechnical support AirLink MP595 / MP595W Modem User Guide 2130795 Regulatory, radio frequency and electrical specifications Technical SpecificationsWeight and dimensions Environmental specificationsHost interfaces GPS specificationsOther interfaces Wireless access point specifications Port characteristicsWPA2 AirLink MP595 / MP595W Modem User Guide 2130795 Canada Regulatory InformationFCC Caution Important NoteApproved antennas Numerics IndexMTP Index AirLink MP595 / MP595W Modem User Guide 2130795

MP595W, MP595 specifications

The Sierra Wireless MP595 and MP595W are robust industrial-grade multi-network routers designed to ensure reliable and high-speed connectivity in a wide range of applications. Both models leverage advanced technologies to meet the demands of IoT (Internet of Things), M2M (Machine-to-Machine), and remote network management, making them ideal for various sectors, including transportation, utility, and smart city initiatives.

One of the standout features of the MP595 and MP595W is their dual-SIM capability. This functionality allows users to connect to two different mobile networks simultaneously, providing added reliability and redundancy. In scenarios where one network experiences failures or inadequate performance, the router can seamlessly switch to the secondary SIM. This ensures continuous connectivity, which is crucial for critical applications where downtime can result in significant losses.

Both models support a full range of cellular technologies, including 4G LTE and 3G, enabling high-speed connections with the flexibility to adapt to different network conditions. The MP595W variant offers additional capabilities, including built-in Wi-Fi, allowing users to set up a local wireless network and connect multiple devices easily.

Furthermore, these routers feature advanced security mechanisms, supporting VPN (Virtual Private Network) protocols and firewall functionalities. This ensures secure data transmission and protects sensitive information from potential threats, making them suitable for enterprise-level applications.

The user-friendly management interface enables easy configuration and monitoring. Sierra Wireless provides comprehensive tools and APIs that facilitate remote management, allowing users to manage and update the router's settings from anywhere, thereby reducing maintenance costs and time.

The routers also come equipped with multiple Ethernet ports, allowing for direct wired connections to equipment and devices. This versatility makes them suitable for a variety of setups, from simple installations to more complex network configurations.

With their rugged design, the MP595 and MP595W are built to withstand harsh environmental conditions, making them perfect for outdoor deployments. They are designed to operate across a wide temperature range, ensuring consistent performance in extreme weather.

In conclusion, the Sierra Wireless MP595 and MP595W are powerful, versatile, and secure solutions for organizations needing robust mobile connectivity. Their advanced features and reliability make them indispensable in achieving seamless communication across various industrial applications.
Top Page Image Contents