Telular user manual Getting Started, Un-Packing Your Phonecell SX3i, Pre-Installation Checklist

Getting Started...

Un-Packing Your Phonecell SX3i

Ë

ÊÌ

The Phonecell SX3i comes with the following:

ÊPhonecell SX3i Fixed Wireless Terminal (FWT) Ë AC Power Cord

Ì Drill Mounting Template

ÍThree Rubber Feet for Desktop/Tabletop Use* (*Do not attach feet if wall-mounting the FWT.)

Í

Carefully remove the unit from the shipping carton and check for evidence of shipping damage. If damage is found, contact your Authorized

Telular Distributor or shipping agent immediately.

Pre-Installation Checklist

Before attempting Phonecell SX3i installation, make sure you have the following components, tools and materials.

Components Needed

Qty.	Description	Supplied	Not Supplied
1	Antenna (Spike, Magnetic-Mount, or Yagi)		4
2	6-Volt, 4.5 AH Lead-Acid Batteries (Optional		4
	for Battery Backup)
1	RJ-11 Modular Phone Cord (Length varies		4
	according to your specific installation and
	the number of phones you plan to connect)
1	RJ-11 Phone Line Splitter (if you plan to		4
	connect more than one telephone device)

Tools & Materials Needed (for Wall-Mount Installation Only)

Qty.	Description	Supplied	Not Supplied
1	Drill & Drill Bit		4
1	Screwdriver		4
2	11/2-inch (3.75 cm) Mounting Screws		4

PHONECELL SX3i AMPS 4 USER MANUAL 12/08/99