NAM/Phone Number Setup – Override Commands
NOTE: The following NAM Parameters are automatically set by the SID value in step 4 on the previous page. These steps 5 - 7 are only needed if you want to override the standard AMPS settings listed on the previous page. Otherwise, continue to Step 4 – Optional Battery Installation on pages 12,13.
Step #5a - How to Override the Initial Dedicated Control Channel and First Paging Channel.
If you have an “A” cellular service provider with an odd SID (System Identifier), enter the following 2-part key sequence. Otherwise, continue to Step #5b.
1)First press:
2)Next press:
# * 24 * _ _ _ _ #
# * 4 * _ _ _ _ #
(Note: enter the same 1- to 4-digit channel in both steps above.)
The spaces represent your 1- to 4-digitInitial Dedicated Control Channel and First Paging Channel. When you turn on your Phonecell, these channels help the service provider find you and vice-versa. NOTE: The default setting is channel 333 for "A" service providers. To change the setting, you must enter a 1- to4-digitnumber in the range of 0 to 1023. (For example, to set up channel 565, enter #*24*565#.) If you enter the channel incorrectly, you'll hear three short tones followed by the programming tone; if correct, you'll hear the programming tone again.
Step #5b - If you have a “B” cellular service provider with an even SID (System Identifier), enter the following 2-part key sequence.
1)First press:
2)Next press:
# * 25 * _ _ _ _ #
# * 4 * _ _ _ _ #
(Note: enter the same 1- to 4-digit channel in both steps above.)
The spaces represent your 1- to 4-digitInitial Dedicated Control Channel and First Paging Channel. When you turn on your Phonecell, these channels help the service provider find you and vice-versa. NOTE: the default setting is channel 334 for "B" service providers. To change the setting, you must enter a 1- to4-digitnumber in the range of 0 to 1023. (For example, to set up channel 566, enter #*25*566#.) If you enter the channel incorrectly, you'll hear three short tones followed by the programming tone; if correct, you'll hear the programming tone again.
Continued...
PHONECELL SX3i AMPS | 10 | USER MANUAL 12/08/99 |
