3 - Installing the SAGEM F@stTM 1000 modem
!Choose the options:
In Quality Of Service:
Type: Unspecified Bit Rate,
Rate: Line Rate.
In Circuit Type:
Permanent virtual circuit: Virtual Path Identifier (VPI) 5 and Virtual Circuit Identifier (VCI) 3,
Framing: Logical Link Control.
!Then click OK, and Next.
!Enter any area code and any phone number.
!Click Next, then Finish.
On the icon for the newly created connection:
!
!Select the Networking tab.
!Choose the options:
In Advanced options:
-disable software compression.
In Allowed network protocols:
-disable the protocols NetBEUI and IPX/SPX,
-enable the protocol TCP/IP.
5
User Guide - N56815740110
No reproduction or communication without the written consent of SAGEM SA | Page |