Sagem N56815740110 manual Installing for Windows 98 First Edition, Installing the modem

!3 - Installing the SAGEM F@stTM 1000 modem

3.5Installing for Windows 98 First Edition

For Windows 98 First Edition, installation of the SAGEM F@stTM 1000 modem is carried out according to the following process:

!Installing the modem drivers,

!Configuring a new dial-up connection.

3.5.1Installing the modem

!Switch off the modem if it is powered by unplugging the power supply cable either on the modem side (connector marked PWR), or on the mains side.

!Switch on the PC and wait for the complete start-up of Windows 98FE.

!Insert the installation CD-ROM; the welcome page appears after a few seconds.

If this screen does not appear automatically proceed as follows:

From the Start menu select Run then enter <Drive letter for the CD-ROM>:\English\Setup.exe.

!Select Modem setup on the welcome page.

The install program checks the software configuration of Windows.

!Insert the Windows 98FE CD-ROM when Windows asks for it:

!Click on OK to continue.

When all Windows components are installed on your PC, the following screen appears:

User Guide - N56815740110

Page 3-36No reproduction or communication without the written consent of SAGEM SA