GBC 620OS Bursting Rollers, Film Tension Knob, Film Slitter Rewinder Tension Knob, Media Table

GBC 620os Operation Manual

FEATURES/ACCESORIES GUIDE

Figure 15

Figure 16

Figure 17

BURSTING ROLLERS

(Fig. 14– Item N1)

When the Bursting Rollers are activated, images are separated. There are 2 speeds to select from on the Main

Control Panel.

STACKER TRAY LATCHES (Fig. 14– Item O1)

The Stacker Tray Latches secures the Stacker Tray to the laminator.

FILM TENSION KNOB

(Fig. 15– Item P1)

The Film Tension Knob allows the operator to adjust the amount of film tension.

FILM SLITTER REWINDER TENSION KNOB

(Fig. 15– Item Q1)

The Film Slitter Rewinder Tension Knob allows the operator to adjust the amount of tension to the Rewinder.

MEDIA TABLE

(Fig. 16– Item R1)

The Media Table provides a working space for the operator. The Media Table is used to store media being used during operation of the laminator.

MEDIA TABLE HANDLE

(Fig. 16– Item S1)

The Media Table Handle allows the operator to pull the Media Table out for use and return to original location.

COMPRESSOR OUTPUT HOSE

(Fig. 17– Item T1)

The Compressor Output Hose supplies the laminator with the necessary PSI to run the laminator.

COMPRESSOR PLUG

(Fig. 17– Item U1)

The Compressor Plug plugs into an independent power source. The Compressor needs 220VAC. See Specs for details on plug configuration.

COMPRESSOR AIR REGULATOR

(Fig. 17– Item V1)

The Compressor Air Regulator allows the operator to adjust the amount of PSI used.

COMPRESSOR ON/OFF

(Fig. 17– Item W1)

The Compressor On/Off allows the operator to turn the Compressor On and off.

© 2007 General Binding Corporation Page 13