GBC 620OS operation manual Pre-Installation, GBC 620os Requires

Page 6

GBC 620os

Operation Manual

PRE-INSTALLATION

Before a 620os Laminator can be installed, ensure the following requirements are met:

1. Are doorways and hallways wide enough for the laminator to be moved to the installation site?

2. Is there ample room for the laminator?

• A work area must be established that allows for operation in both the front and rear of the laminator and provides space for efficient material flow.

3. Is the environment appropriate for the laminator?

• The laminator requires a clean, dust and vapor free environment to operate properly.

• Avoid locating the laminator near sources of heat or cold. Avoid locating the laminator in the direct path of forced, heated or cooled air.

CAUTION: Air flow can cause uneven heating / cooling of the rollers and result in poor output quality.

4. Have you contacted a certified electrician to wire the receptacle and ensure that adequate power is being supplied, having the appropriate capacity, over current protection and safety lockouts available?

GBC 620os Requires:

• 220V at 60Hz with 20 Amps single phase.

• Nema 6-15 P 15 A 250 V Receptacle

• A Buck Booster may be needed if voltage is not correct. Please contact a licensed electrician to install if needed.

This Machine is supplied with a Nema 6-15 male Plug.

INSTALLATION

1.Shipping damage should be brought to the immediate attention of the delivering carrier.

2.With assistance, carefully roll the laminator into position over flat and even surfaces.

3.The laminator should be positioned to allow exiting film to flow freely to the floor or a work table. Accumulation of laminate immediately behind the laminator as it exits the equipment may cause the film to wrap around the pull rollers, resulting in a “jammed” condition.

4.Avoid locating the laminator near sources of heat or cold. Avoid locating the laminator in the direct path of forced, heated or cooled air.

5.Once the laminator has been properly positioned, lock the castors in place. Locking the castors prevent the machine from rolling during set up, operation or servicing.

6.Connect the attachment plug provided with the laminator to a suitably grounded outlet. Avoid connecting other equipment to the same branch circuit to which the laminator is connected, as this may result in nuisance tripping of circuit breakers or blowing fuses.

Note: Machine must be leveled to ensure best performance. Level the machine by lowering both the main and pull rollers. Lay a level on top of the main and pull rolls. Then, check level from main roll to pull roll on right and left side of the roll. Finally, check by placing the level diagonally across lower main to lower pull rolls.

© 2007 General Binding Corporation

Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operating Instructions GBC 620os Table of Contents Important Safety Instructions Important SafeguardsInstructions and Save These Instructions for Later USE Warranty SpecificationsModifications PRE-INSTALLATION InstallationGBC 620os Requires Front Control Guide Master DIAL. See Figure FEATURES/ACCESORIES Guide Front Safety Shield Interlock LatchesEmergency Stop Buttons Guide Ruler IN-LINE SlittersCoolin Tube Idler BARLocking Pins Main ON/OFF SwitchPower Cord Nomenclature PlatePull Rollers Skew Wheel Pressure AdjustmentRear Safety Shield Skew WheelFilm Slitter Rewinder Tension Knob Bursting RollersFilm Tension Knob Media TableLoading Film & Threading Film Do not USE Colored Prints AS Shown Photos for Threading StepShield’s Safety Interlocks Step GBC 620os Slitting Film Slitting FilmBasic Rules Speed / Temperature ControlART of Lamination Film TensionOutput Troubleshooting GBC 620os Tension Maintenance Service Agreement

620OS specifications

The GBC 620OS is an innovative and versatile binding machine that stands out in the realm of document finishing solutions. Designed for both professional and office environments, it combines efficiency with a range of advanced features tailored to meet the diverse needs of users.

One of the main features of the GBC 620OS is its ability to handle various binding styles. It supports different types of binding, including comb, wire, and thermal binding, allowing users to choose the method that best fits their document presentation needs. This versatility ensures that both simple reports and sophisticated presentations can be assembled with ease.

The GBC 620OS is equipped with a user-friendly interface, making it accessible for both experienced users and beginners. The machine features intuitive controls that guide users through the binding process, reducing the learning curve associated with more complex binding machines. Furthermore, it incorporates a built-in document thickness sensor that automatically adjusts the binding settings for optimal performance.

In terms of productivity, the GBC 620OS is designed to maximize efficiency. It boasts a high-speed punching mechanism, which allows users to punch multiple sheets in a single operation. This feature is particularly beneficial for high-volume binding tasks, saving time and effort during the document preparation process. Additionally, the machine has a large binding capacity, capable of handling documents with a thickness of up to 500 sheets, making it suitable for a wide range of applications.

Another key characteristic of the GBC 620OS is its robust construction. Built with durability in mind, this binding machine is designed to withstand the rigors of frequent use, ensuring long-term reliability. The high-quality materials used in its construction contribute to reduced maintenance needs, making it a cost-effective choice for organizations looking to enhance their binding capabilities.

The GBC 620OS also emphasizes safety features designed to protect the user. It is equipped with safety mechanisms that prevent accidental operation, reducing the risk of injuries during use. Additionally, the machine's compact design allows for easy storage and mobility, ensuring it can fit into various workspace configurations.

In summary, the GBC 620OS is a powerful and versatile binding machine that combines user-friendly features, advanced technology, and durable construction. Its ability to accommodate multiple binding styles and high-volume tasks makes it an essential tool for any organization looking to improve its document finishing processes. Whether for reports, presentations, or other important documents, the GBC 620OS delivers consistent results with a professional touch.
Top Page Image Contents