GBC 620OS Nomenclature Plate, Main ON/OFF Switch, Fuses, Power Cord, Locking Pins, TOP Film Idler

GBC 620os Operation Manual

FEATURES/ACCESORIES GUIDE

V

W

X

Y

Figure 9

Z A1

Figure 10

C1 B1

NOMENCLATURE PLATE

(Fig. 9– Item V)

The Nomenclature Plate provides the operator the necessary Technical information such as Voltage, Amperage, Wattage, Model Number and Serial Number.

MAIN ON/OFF SWITCH

(Fig. 9– Item W)

The Main On/Off Switch supplies power or removes power from the machine.

FUSES

(Fig. 9– Item X)

The Fuses protect internal PCB’s and motors.

POWER CORD

(Fig. 9– Item Y)

The Power Cord plugs into the Main Power source or outlet. See (Machine Specs for plug requirements.)

LOCKING PINS

(Fig10– Item Z)

The Locking Pins secure the Film Shaft Latch.

FILM SHAFT LATCH

(Fig. 10– Item A1)

The Film Shaft Latch secures the Supply shaft ensuring that the film is supported and enters the nip accurately.

PRELAMINATING FILM PERFEORATOR WHEEL

(Fig. 11– Item B1)

The Prelaminating Film Perforator Wheel pierces small holes into the film to ensure controlled snapping or separating of images.

FILM CORE CHUCKS

(Fig. 11– Item C1)

The Film Core Chucks secure the film onto the Supply

Shaft.

D1	E1	FILM SUPPLY SHAFT
		(Fig. 11– Item D1)

The Film Supply Shaft accepts a 3 inch Core Chuck. The two Core Chucks slide onto the Film Supply Shaft, supporting the film being used. The Film Supply Shaft has a ruler adhered to the shaft for ease and accuracy when aligning the film and medias.

Figure 11

TOP FILM IDLER

(Fig. 11– Item E1)

The Top Film Idler guides the film through the nip giving the film adequate film dwell time.

© 2007 General Binding Corporation Page 11