Connecting and Configuring your Router
Step 5 Configure the Router
The Wizard will now transfer all of the configuration information to the Router. This will take approximately one minute. During this time, do not turn off the Router or computer. The Router will restart itself at the end of this step.
5.1Checking Internet
The Wizard will now check for an Internet connection. This can take a few minutes. The Wizard may not detect a connection right away. If not, it will retry a number of times. The “Connected” light on the front panel of the Router will flash during this time. Please be patient through this process.
5.2Finished
When the Internet connection is complete, the Wizard will tell you that you are finished. The “Connected” LED on the front of the Router will be solid BLUE, indicating that the Router is now connected to the Internet.
Your Router is now connected to the Internet. Now you can begin surfing the Internet by opening your browser and going to your favorite web page.
20