Ativa AWGR54 user manual WEP Setup, Bit WEP Encryption

Using the Web-Based Advanced User Interface

WEP Setup

64-Bit WEP Encryption

1.Select “WEP” from the “Security” menu’s “Allowed Client Type”.

2.Select “64-bit” as the WEP mode.

3.After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually, or you can put a check mark in “Passphrase”, then type in your passphrase. Click “Apply Changes” to generate four different hex keys.

A hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–9. For 64-bit WEP, you must enter 10 hex keys.

For instance: AF 0F 4B C3 D4 = 64-bit WEP key

4.Select the “Default Key ID” from the drop-down menu.

WARNING: If you are configuring the Wireless G Router or access point from a computer with a wireless client, you must ensure that security is turned ON for this wireless client. If this is not done, your client will lose its wireless connection.

50