Fuse Replacement
1.With a flat head screwdriver wedge the fuse
| holder out of its housing. | The fuse is | |
2. | Remove the damaged fuse from its holder | located inside | |
this | |||
| and replace with exact same type fuse. | ||
|
| ||
3. | Insert the fuse holder back in its place and |
| |
| reconnect power. |
|
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
Mounting
Orientation
This product may be mounted in any safe position, provided there is adequate room for ventilation.
Rigging
It is important never to obstruct the fan or vents pathway. Mount the product using, a suitable “C” or “O” type clamp. Adjust the angle of the product by loosening both knobs and tilting the product. After finding the desired position, retighten both knobs.
∙When selecting installation location, take into consideration access and routine maintenance.
∙Safety cables must always be used.
∙Never mount in places where the product will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.
∙Do not use any tool on the bracket adjustment knob.
Note!
Clamp is sold separately.
Hanging Clamp
Scorpion™ GBC User Manual | 12 | August 2011 |