Chauvet Laser Pointer user manual Laser Emission Data, Laser Compliance Statement, Laser Exposure

Page 8

Laser Emission Data

LASER EXPOSURE

Laser light - Avoid direct eye contact!

Further guidelines and safety programs for safe use of lasers can be found in the ANSI

Z136.1 Standard “For Safe Use of Lasers”, available from the Laser Institute of America: www.laserinstitute.org. Many local governments, corporations, agencies, military and others, require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display guidance can be obtained via the International Laser Display Association: www.laserist.org.

Scorpion™ GBC

Laser Classification

Class IIIa (equiv. to US Class IIIa)

 

 

Green Laser Medium

DPSS Nd:YVO4, 532 nm

 

 

Blue Laser Medium

473 nm, typical

 

 

Beam Diameter

<5 mm at aperture

 

 

Pulse Data

All pulses < 4 Hz (>0.25 sec)

 

 

Divergence (each beam)

<2 mrad

 

 

Divergence (total light)

<160 degrees

 

 

Laser Power of Each

<5 mW

Beam from Aperture*

 

*As measured under IEC measurement conditions for classification.

Laser Compliance Statement

This laser product complies with EN/IEC 60825-1 Ed 2, 2007-03, and US FDA/CDRH FLPPS via the terms of Laser Notice No. 50 dated June 24, 2007. This laser device is classified 3R. (Class 3R is the international equivalent of US Class IIIa). No maintenance is required to keep this product in compliance with laser performance standards.

Scorpion™ GBC User Manual

8

August 2011

Image 8
Contents Laser Light Avoid Direct EYE Exposure Product at a Glance Contact InformationDocument Information Table of Contents What Is Included Unpacking InstructionsClaims Text ConventionsSafety Notes Stop and Read ALL the Laser Safety Notes below Non Interlocked Housing WarningLaser Safety Notes Laser Safety Labels Reproduction Laser Emission Data Laser Compliance StatementLaser Exposure Laser light Avoid direct eye contactBack Panel IntroductionProduct Overview Product Dimensions Power Linking SetupAC Power Fuse Replacement MountingOrientation RiggingProper Usage DMX Operation OperationControl Panel DMX Channel Summary Standalone OperationAutomatic Sound-ActiveMaster/Slave Operation Menu FunctionsManual Mode use channels 2~10 in this mode Pattern selection only when CH1 is betweenDMX Channel Values 000~017Channel 2 Values Pattern Selection Technical Information General TroubleshootingSymptom Solutions Applies to World Wide Returns ProcedureContact Us Setting up a DMX Serial Data Link DMX PrimerOutpu Data CablingInpu Setting the Starting Address Product LinkingTechnical Specifications