4.OPERATION
Control Panel
Access control panel functions using the four panel buttons located directly underneath the LED Display.
|
|
|
|
|
|
|
Button | Function |
|
|
|
|
|
|
|
|
|
|
|
|
<MODE> | Used to access the menu or to return to a |
|
|
|
|
|
previous menu option |
|
|
|
|
| |
|
|
|
|
|
| |
<UP> | Scrolls through menu options in |
|
|
|
|
|
ascending order |
|
|
|
|
| |
|
|
|
|
|
| |
<DOWN> | Scrolls through menu options in |
|
|
|
|
|
descending order |
|
|
|
|
| |
|
| MOD | U | DOW ENT | ||
| Used to select and store the current |
| ||||
<ENT> |
| E | P | N | ||
menu or option within a menu |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
The Control Panel LED Display shows the menu items you select from the menu map. When a menu function is selected, the display will show immediately the first available option for the selected menu function. To select a menu item, press <ENT>.
Use <UP> and <DOWN> to navigate the menu map and menu options. Press <ENT> to access the menu function currently displayed or to enable a menu option. To return to the previous option or menu without changing the value, press <MODE>.
DMX Operation
This is the operating mode which will allow for control with an external DMX controller. You must set the starting address for this mode. If this is your first time using DMX, then it is recommended that you refer to the “DMX Primer” section in the “Appendix” of this manual.
When operating in DMX receiving mode, the display will blink at a constant rate in the absence of DMX signal.
Use the following procedure for setting the product to DMX operation.
1.Press <MODE> repeatedly until a number from 001~512 appears on the LED display.
2.Use <UP> and <DOWN> to select the DMX starting address.
3.Press <ENT>.
Scorpion™ GBC User Manual | 14 | August 2011 |