Master/Slave Operation
When operating more than one product in standalone mode, it is possible to link them in a master/slave configuration. This is when one or more slave products will operate identically to the master product. Please see the instructions below for further explanation on how to set a product to slave mode.
1.Press <MODE> until slave mode appears on the LED display. See the chart under menu functions to identify this.
2.Press <ENT>.
A product that is operating in one of the standalone modes will function as a master unit when the products are linked using DMX cables in a daisy chain configuration.
Menu Functions
MAIN FUNCTION | SELECTION | DESCRIPTION/VALUES | ||
DMX mode | 001 | 001 - |
| DMX starting address assignment |
|
| 511 |
|
|
| AFB | Automatic fast (blue) | ||
| ASB | Automatic slow (blue) | ||
| AFG | Automatic fast (green) | ||
| ASG | Automatic slow (green) | ||
| AFC | Automatic fast (cyan) | ||
| ASC | Automatic slow (cyan) | ||
| AFN | Automatic fast (mixed) | ||
Standalone | ASN | Automatic slow (mixed) | ||
S B | Sound (blue) |
| ||
modes |
| |||
| S G | Sound (green) |
| |
| S C | Sound (cyan) |
| |
| S N | Sound (mixed) |
| |
| rDN | Random |
| |
| LSb | Laser sky (blue) |
| |
| LSG | Laser sky (green) | ||
| LSC | Laser sky (cyan) | ||
| LSS | Laser sky (sound) | ||
Slave Mode | SLA | Slave mode |
| |
|
| |||
Test Mode | tSt | Used for service purposes | ||
| ||||
Scorpion™ GBC User Manual | 16 | August 2011 |