Sony FWD-S47H1 manual Analog Signal Detect Function, Code -d, Input Select

Page 10

Code Table (1-a)

[a]Function		[b]Range/Switch Code		Command
				Control	Enquiry	Standby	Power On
0x7E	On Screen Logo	0x00	OFF	Yes	Yes	Enable	Enable

		0x01	ON (Default)

		0x02	Reserved

0x7F	LED	0x00	OFF	Yes	Yes	Disable	Enable

		0x01	ON
0x81	Power On Delay	0x00-0x78 1sec x Data		Yes	Yes	Enable	Enable

*1: Auto Signal Detect becomes Disable. When Option Slot is connected, Option command is Enable.

*2: Restricts a part of keys operation following below. [Remote Commander]

Menu, Picture, Sound, ECO (Power Saving), Contrast+/_,Brightness, Chroma, H Shift, V Shift, V size, PAP [Main]

Menu

*3: Digital Signal Status is Enable for Digital Input Signal Detect Function only in Stable.

*4: Digital Signal or VIDEO Signal is Enable. Return Signal Status of Active Window.

*5: Only the panel power supply is turned off at the standby when setting it “ON”.

5. Analog Signal Detect Function

(a) Mode Control

Syntax	Header	Category	Function	Data1	Data2	Check Sum
Enquiry	0x83	0x00	Code Table (1-a) [a]	Code Table (1-d)	0xFF	0xXX


Answer	Header	Answer	Return to Data Size	Return Data1	Data2	Check Sum
Enquiry	0x70	0x00	0x02	Code Table (1-a) [b]	0xFF	0xXX	Completed

Code Table (1-a)

[a]Function	[b]Range/Switch Code		Command
			Control	Enquiry	Standby	Power On
0x78 Analog Signal Detect	0x00	VIDEO	No	Yes	Disable	Enable

	0x01	PC

Code Table (1-d)

Input Select

0x00	Main

0x01	Sub

0xFF	Present input

1-a[b]

When input is no signal or not supported signal, return value become Video(0x00).

FWD-S42H1

Image 10

Contents FWD-S47H1/S42H1 Table of Contents Communication Data Format Communication ParametersPin Assignment Control messageAnswer message Enquiry answer Command cancelEnquiry message Control answerGeneral Function Error answerMode Control Code -aNtsc PAP Dhcp Bit2 Reserved Bit3 Code -d Analog Signal Detect FunctionInput Select Time Control Priority Signal Select FunctionData Set Month, Date Clock Set Week Year SetClock Set Hour, Minute Answer Header Return to Data Size Return Data1 Check SumCode -f On Timer, Off TimerCode -e Week SelectIP Address Setting Player IP Address Picture/SoundPicture/Sound 0x0C Dynamic Picture 0x00 Code -b Color TempCode -c Size/Shift 8Bits RegisterAuto FWD-S42H1 Power On Batch Answer Header Return to Data Size Data2 Data3 Check SumSerial Number Status EnquiryModel Name Operation TimeSoft Version Main CPU/LAN When the display value is 3.0 V,0x1E30 is returnedWhen the display value is 20 dC, 0xECis re- turned Code -kLAN Firmware Version Shutdown LogShutdown Log Clear Data1 Data2 Check SumInput Auto Input DetectReturn Data11 Check Sum Option Type Input Type OptionAuto Panel Type Detect AFunction BRange/Switch codeControl Enquiry Standby Power On Code -h Code Table Code -jAuto Plug Detect User Reset Snmp Operation of Snmp Setting Window Specifications of Snmp InstallationInstallation Snmp Setting window on WebRights Setting procedure of CommunityCommunity Trap destinationsEditing of Community Authentication TrapIP Restriction of Host Removal of CommunityMIB to Be Installed Information to Be Notified on TrapDefault Setting DescriptionHeader Setting ItemsPacket Structure VersionRequest CommandResponse Responses Requests and ResponsesRequests SET requestError response ItemsF100h Item errors Error CodesCommunity error Comm error Request errorsNetwork error Nvram error