Sony FWD-S47H1 manual MIB to Be Installed, Information to Be Notified on Trap

Page 33

5. MIB to Be Installed

This unit installs MIB-2.

MIB-2 is the most representative standard MIB. It is installed in various network products.

The statistical information on the amount of network traffic or the number of transmitted and received packets is defined, and the change or transition can be monitored by polling the information periodically. Additionally, the management items to be installed can be defined using a TCP/IP device so as to get the information effective for the monitoring of the network communication state.

Refer to RFC1213 for the detailed definition of MIB-2.

6. Information to Be Notified on Trap

In software version 2.0 or later, the software have a function that transmits error information to this unit. The error trap and authentication trap are installed.

FWD-S42H1

Image 33

Contents FWD-S47H1/S42H1 Table of Contents Pin Assignment Communication ParametersCommunication Data Format Control messageEnquiry message Enquiry answer Command cancelAnswer message Control answerMode Control Error answerGeneral Function Code -aNtsc PAP Dhcp Bit2 Reserved Bit3 Analog Signal Detect Function Code -dInput Select Priority Signal Select Function Time ControlData Set Month, Date Clock Set Hour, Minute Year SetClock Set Week Answer Header Return to Data Size Return Data1 Check SumCode -e On Timer, Off TimerCode -f Week SelectIP Address Setting Picture/Sound Player IP AddressPicture/Sound 0x0C Dynamic Picture 0x00 Color Temp Code -bCode -c 8Bits Register Size/ShiftAuto FWD-S42H1 Answer Header Return to Data Size Data2 Data3 Check Sum Power On BatchModel Name Status EnquirySerial Number Operation TimeWhen the display value is 20 dC, 0xECis re- turned When the display value is 3.0 V,0x1E30 is returnedSoft Version Main CPU/LAN Code -kShutdown Log Clear Shutdown LogLAN Firmware Version Data1 Data2 Check SumReturn Data11 Check Sum Auto Input DetectInput Option Type Input Type OptionControl Enquiry Standby Power On AFunction BRange/Switch codeAuto Panel Type Detect Code -h Code Table Code -jAuto Plug Detect User Reset Snmp Installation Specifications of Snmp InstallationOperation of Snmp Setting Window Snmp Setting window on WebCommunity Setting procedure of CommunityRights Trap destinationsIP Restriction of Host Authentication TrapEditing of Community Removal of CommunityInformation to Be Notified on Trap MIB to Be InstalledDescription Default SettingPacket Structure Setting ItemsHeader VersionCommand RequestResponse Requests Requests and ResponsesResponses SET requestItems Error responseF100h Error Codes Item errorsCommunity error Network error Request errorsComm error Nvram error