Sony FWD-S47H1 manual Enquiry message, Answer message, Control answer, Enquiry answer Complete

Page 4

(b) Enquiry message

No.	Item	Value
1	Header	0x83: Enquiry

2	Category	0xXX

3	Function	0xXX

4	Data1	0xFF

5	Data2	0xFF

6	Check Sum	0xXX

*Check Sum: Sum total of 1 to X, lower one-byte data is validated when a value exceeds 255 (1byte).

(c)Answer message

1 Control answer

No.	Item		Value
1	Header		0x70: Answer

2	Answer*		0x00: Completed

			0x01: Limit Over

			0x02: Limit Under

			0x03: Command Canceled
3	Check Sum		0xXX

* 0x00:	Completed	Packet is correctly received and process is also correctly completed.
0x01:	Limit Over	Packet is correctly received, but the data value is over the upper limit.
0x02:	Limit Under	Packet is correctly received, but the data value under the lower limit.
0x03:	Command Canceled	Packet is correctly received, but the data value is not correct or the request cannot be accepted in the current host state.
* Check Sum:		Sum total of 1 to X, lower one-byte data is validated when a value exceeds 255 (1byte).

2Enquiry answer (Complete)

No.	Item	Value
1	Header	0x70: Answer

2	Answer	0x00: Completed

3	Return Data Size	0xXX

4	Return Data1	0xXX

:	:	0xXX
:	:	0xXX

X	Return DataX	0xXX

X+1	Check Sum	0xXX

* 0x00: Completed		Packet is correctly received and process is also correctly completed.
*	Return Data:	Returns the read value.
*	Check Sum:	Sum total of 1 to X, lower one-byte data is validated when a value exceeds 255 (1byte).

3Enquiry answer (Command cancel)

No.	Item	Value
1	Header	0x70: Answer

2	Answer	0x03: Command Canceled
3	Check Sum	0x73
0x03:	Command Canceled	Packet is correctly received, but the data value is not correct or the request cannot be accepted in the current host state.

FWD-S42H1

Image 4

Contents FWD-S47H1/S42H1 Table of Contents Communication Parameters Pin AssignmentCommunication Data Format Control messageEnquiry answer Command cancel Enquiry messageAnswer message Control answerError answer Mode ControlGeneral Function Code -aNtsc PAP Dhcp Bit2 Reserved Bit3 Code -d Analog Signal Detect FunctionInput Select Time Control Priority Signal Select FunctionData Set Month, Date Year Set Clock Set Hour, MinuteClock Set Week Answer Header Return to Data Size Return Data1 Check SumOn Timer, Off Timer Code -eCode -f Week SelectIP Address Setting Player IP Address Picture/SoundPicture/Sound 0x0C Dynamic Picture 0x00 Code -b Color TempCode -c Size/Shift 8Bits RegisterAuto FWD-S42H1 Power On Batch Answer Header Return to Data Size Data2 Data3 Check SumStatus Enquiry Model NameSerial Number Operation TimeWhen the display value is 3.0 V,0x1E30 is returned When the display value is 20 dC, 0xECis re- turnedSoft Version Main CPU/LAN Code -kShutdown Log Shutdown Log ClearLAN Firmware Version Data1 Data2 Check SumAuto Input Detect Return Data11 Check SumInput Option Type Input Type OptionAFunction BRange/Switch code Control Enquiry Standby Power OnAuto Panel Type Detect Code -h Code Table Code -jAuto Plug Detect User Reset Snmp Specifications of Snmp Installation InstallationOperation of Snmp Setting Window Snmp Setting window on WebSetting procedure of Community CommunityRights Trap destinationsAuthentication Trap IP Restriction of HostEditing of Community Removal of CommunityMIB to Be Installed Information to Be Notified on TrapDefault Setting DescriptionSetting Items Packet StructureHeader VersionRequest CommandResponse Requests and Responses RequestsResponses SET requestError response ItemsF100h Item errors Error CodesCommunity error Request errors Network errorComm error Nvram error