Sony FWD-S47H1 manual F100h

Page 39

5-2. 90**h

This item gets the network setting information.

Lower byte	Contents	SET	GET
00h	MAC Address	_	O

01h	IP Address	_	O

02h	Subnet Mask	_	O
03h	Default Gateway	_	O

04h	DHCP	_	O

0x9000 MAC Address

6 bytes

0x9001 IP Address

4 bytes

0x9002 Subnet Mask

4 bytes

0x9003 Default Gateway

4bytes

0x9004 DHCP

1 byte

DHCP invalid data value: 0

DHCP valid data value: 1

5-3. F100h

FWD-S42H1/S47H1 dedicated protocol packets can be transmitted to the main microcomputer of FWD- S42H1/S47H1 as ID Talk data according to the FWD-S42H1/S47H1 dedicated protocol. The response of protocol is returned as the data of ID Talk response packets.

Refer to “Section 1 RS-232C” for details on the FWD-S42H1/S47H1 dedicated protocol.

FWD-S42H1

Image 39

Contents FWD-S47H1/S42H1 Table of Contents Control message Communication ParametersPin Assignment Communication Data FormatControl answer Enquiry answer Command cancelEnquiry message Answer messageCode -a Error answerMode Control General FunctionNtsc PAP Dhcp Bit2 Reserved Bit3 Analog Signal Detect Function Code -dInput Select Priority Signal Select Function Time ControlData Set Month, Date Answer Header Return to Data Size Return Data1 Check Sum Year SetClock Set Hour, Minute Clock Set WeekWeek Select On Timer, Off TimerCode -e Code -fIP Address Setting Picture/Sound Player IP AddressPicture/Sound 0x0C Dynamic Picture 0x00 Color Temp Code -bCode -c 8Bits Register Size/ShiftAuto FWD-S42H1 Answer Header Return to Data Size Data2 Data3 Check Sum Power On BatchOperation Time Status EnquiryModel Name Serial NumberCode -k When the display value is 3.0 V,0x1E30 is returnedWhen the display value is 20 dC, 0xECis re- turned Soft Version Main CPU/LANData1 Data2 Check Sum Shutdown LogShutdown Log Clear LAN Firmware VersionOption Type Input Type Option Auto Input DetectReturn Data11 Check Sum InputCode -h Code Table Code -j AFunction BRange/Switch codeControl Enquiry Standby Power On Auto Panel Type DetectAuto Plug Detect User Reset Snmp Snmp Setting window on Web Specifications of Snmp InstallationInstallation Operation of Snmp Setting WindowTrap destinations Setting procedure of CommunityCommunity RightsRemoval of Community Authentication TrapIP Restriction of Host Editing of CommunityInformation to Be Notified on Trap MIB to Be InstalledDescription Default SettingVersion Setting ItemsPacket Structure HeaderCommand RequestResponse SET request Requests and ResponsesRequests ResponsesItems Error responseF100h Error Codes Item errorsCommunity error Nvram error Request errorsNetwork error Comm error