Sony FWD-S47H1 manual Items, Error response

Page 38

4-5. ERROR response

An NG message is returned as a response when an error occurs in the contents of a request or the result of execution.

NG(00h)

Item No.

Error Code(16)

ERROR response

5. Items

Category	Contents	SET	GET
80**h	Gets the information of this unit	O	O

90**h	Gets the network setting information.	_	O

F100h	FWD-S42H1/S47H1 dedicated protocol	O	_

5-1. 80**h

This item gets the information of the connected display equipment.

Lower byte	Contents	SET	GET
00h	Category Code	_	O

01h	Model Name	_	O

02h	Serial Number	_	O

03h	Installation Place	O	O

0x8000 Category code

1 byte

0x8001 Model name

12 alphanumeric characters

For under 12 alphanumeric characters, the remaining section is set as 00h.

0x8002 Serial number

4 bytes

0x8003 Installation place

24 alphanumeric characters

For under 24 alphanumeric characters, the remaining section is set as 00h.

FWD-S42H1

Image 38

Contents FWD-S47H1/S42H1 Table of Contents Communication Data Format Communication ParametersPin Assignment Control messageAnswer message Enquiry answer Command cancelEnquiry message Control answerGeneral Function Error answerMode Control Code -aNtsc PAP Dhcp Bit2 Reserved Bit3 Input Select Analog Signal Detect FunctionCode -d Data Set Month, Date Priority Signal Select FunctionTime Control Clock Set Week Year SetClock Set Hour, Minute Answer Header Return to Data Size Return Data1 Check SumCode -f On Timer, Off TimerCode -e Week SelectIP Address Setting Picture/Sound Picture/SoundPlayer IP Address 0x0C Dynamic Picture 0x00 Code -c Color TempCode -b Size/Shift 8Bits RegisterAuto FWD-S42H1 Power On Batch Answer Header Return to Data Size Data2 Data3 Check SumSerial Number Status EnquiryModel Name Operation TimeSoft Version Main CPU/LAN When the display value is 3.0 V,0x1E30 is returnedWhen the display value is 20 dC, 0xECis re- turned Code -kLAN Firmware Version Shutdown LogShutdown Log Clear Data1 Data2 Check SumInput Auto Input DetectReturn Data11 Check Sum Option Type Input Type OptionAuto Panel Type Detect AFunction BRange/Switch codeControl Enquiry Standby Power On Code -h Code Table Code -jAuto Plug Detect User Reset Snmp Operation of Snmp Setting Window Specifications of Snmp InstallationInstallation Snmp Setting window on WebRights Setting procedure of CommunityCommunity Trap destinationsEditing of Community Authentication TrapIP Restriction of Host Removal of CommunityMIB to Be Installed Information to Be Notified on TrapDefault Setting DescriptionHeader Setting ItemsPacket Structure VersionResponse CommandRequest Responses Requests and ResponsesRequests SET requestError response ItemsF100h Community error Error CodesItem errors Comm error Request errorsNetwork error Nvram error

4-5. ERROR response

5. Items

SET

GET

0x8001 Model name

0x8003 Installation place

FWD-S42H1