Sony FWD-S47H1 manual Rights, Trap destinations, Setting procedure of Community

Page 31

4-1. Community

A Community name is used as the password for SNMP access. The request received from an SNMP man- ager is accepted when the Community name contained in the request coincides with the Community name set. The request is rejected when the former does not coincide with the latter.

A maximum of three Communities can be set.

There are “Rights” and “Trap destinations” items in the property of Community. The property can be set for each set Community.

n

When multiple Communities are set, all set Communities are validated.

1.

Rights

 

The rights that can be set are as follows:

Read Only:

An SNMP manager can reference MIB information using this Community name.

Read Write:

This Community must be set when a write request is sent from an SNMP manager.

Other:

Do not set this option because it is used for the function extension in future.

2.

Trap destinations

When Trap destinations are set, during trap occurrence, a trap is notified to the equipment set as trap destinations using the Community name set.

Up to four Trap destinations can be set to one Community. Trap destinations are not set in default.

n

This product can be set on only the Web screen because it does not install the automatic setting func- tion of Trap destinations.

3.Setting procedure of Community

Community can be added, edited, and removed.

The addition, editing, and removal procedures of Community are described below.

Addition of Community

1.Click the [ADD] button.

The “Community name”, “Rights”, and “Trap destinations” text boxes, and [SETTOLIST] and [CANCEL] buttons are validated.

2.Type the Community name you want to add.

3.Set the Rights of Community and the Trap destinations you want to add.

When you want to save the setting, click the [SETTOLIST] button and then click the [APPLY] button at the bottom of the window.

m

. Click the [CANCEL] button when you want to discard the setting during setting.

. When you want to save setting, be sure to click the [SETTOLIST] button and then click the [APPLY] button.

FWD-S42H1

29

Image 31
Contents FWD-S47H1/S42H1 Table of Contents Control message Communication ParametersPin Assignment Communication Data FormatControl answer Enquiry answer Command cancelEnquiry message Answer messageCode -a Error answerMode Control General FunctionNtsc PAP Dhcp Bit2 Reserved Bit3 Code -d Analog Signal Detect FunctionInput Select Time Control Priority Signal Select FunctionData Set Month, Date Answer Header Return to Data Size Return Data1 Check Sum Year SetClock Set Hour, Minute Clock Set WeekWeek Select On Timer, Off TimerCode -e Code -fIP Address Setting Player IP Address Picture/SoundPicture/Sound 0x0C Dynamic Picture 0x00 Code -b Color TempCode -c 8Bits Register Size/ShiftAuto FWD-S42H1 Answer Header Return to Data Size Data2 Data3 Check Sum Power On BatchOperation Time Status EnquiryModel Name Serial NumberCode -k When the display value is 3.0 V,0x1E30 is returnedWhen the display value is 20 dC, 0xECis re- turned Soft Version Main CPU/LANData1 Data2 Check Sum Shutdown LogShutdown Log Clear LAN Firmware VersionOption Type Input Type Option Auto Input DetectReturn Data11 Check Sum InputCode -h Code Table Code -j AFunction BRange/Switch codeControl Enquiry Standby Power On Auto Panel Type DetectAuto Plug Detect User Reset Snmp Snmp Setting window on Web Specifications of Snmp InstallationInstallation Operation of Snmp Setting WindowTrap destinations Setting procedure of CommunityCommunity RightsRemoval of Community Authentication TrapIP Restriction of Host Editing of CommunityInformation to Be Notified on Trap MIB to Be InstalledDescription Default SettingVersion Setting ItemsPacket Structure HeaderRequest CommandResponse SET request Requests and ResponsesRequests ResponsesItems Error responseF100h Item errors Error CodesCommunity error Nvram error Request errorsNetwork error Comm error