Dell SE500W manual Redundant power supply

Page 18

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Cabling One PowerVault 22xS Shared Storage System to a Cluster SE500W

NOTE: See "Configuring the PowerVault 22xS Storage System for Cluster Mode" for more information about configuring the storage systems.

NOTICE: Do not turn on the systems or the storage system(s) until the split-bus module on the back of the PowerVault system has been set to cluster mode and all cabling is complete.

NOTICE: The asymmetrical, D-shaped SCSI connectors can be damaged if they are forced together when they are not oriented to each other correctly. To avoid connector damage, match the connector shapes (long side-to-long side and short side-to-short side). Insert the cable connector straight (not at an angle) into the card connector.

1Connect the SCSI connector A (see Figure 2-1) on the back of the PowerVault 22xS storage system to the 68-pin connector on the first SCSI cable (see Figure 2-2), and then tighten the retaining screws.

NOTE: As viewed from the back of the system, the left EMM is the primary EMM and the right EMM is the secondary EMM.

NOTE: See "Enabling the Cluster Mode Using the PERC RAID Adapter" for more information about cluster-enabling the card.

2Connect the very high-density connector interface (VHDCI) connector of the first SCSI cable to the channel 0 connector on the cluster-enabled PERC RAID adapter in the first PowerEdge system (see Figure 2-2), and then tighten the retaining screws.

Figure 2-1. PowerVault 22xS Back Panel

redundant cooling fans (2)

power supply

 

SCSI connector A

redundant power supply

primary EMM

SCSI connector B

split bus module

secondary EMM

NOTE: Ensure that you securely tighten the retaining screws on all SCSI connectors to ensure a reliable connection.

18

Cabling Your Cluster Hardware

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Installation and Troubleshooting Guide Abbreviations and Acronyms Contents Assigning Static IP Addresses to Your Cluster Updating the Windows Driver for the Perc RAID AdapterNaming and Formatting Drives on Installing and Configuring Microsoft Windows Configuring Microsoft Windows ServerMicrosoft Cluster Administrator Configurations Using Non-Dell Products Setting Advanced Resource PropertiesConfiguring Active and Passive Cluster Nodes Uninstalling Mscs From Clusters RunningChanging the Cluster Service Account Password PowerEdge Cluster SE500W Solution Data FormMaximum Configuration of the PowerEdge Private Network Hardware Components Power Cabling Example With Two PowerBus Configuration Switch Modes Important System Warning Applications and Hardware RequiringObtaining More Information IntroductionIntended Audience IntroductionObtaining Technical Assistance Overview Virtual Servers and Resource GroupsQuorum Resource PowerEdge Cluster SE500W Solution Shared Storage SystemsOperating Systems Configuration, at least three virtual disks are recommended Storage SystemEdition X64 Edition Hardware and Software Technologies Cluster ComponentsSystem Requirements Scsi cablesCluster Nodes Cluster storageCluster Node Requirements Component Minimum Requirement Other Documents You May Need Cabling for the Cluster SE500W Solution Cabling Your Cluster HardwareCabling Your Cluster Hardware Redundant power supply Node Shared storage connector BPin connector Shared storageAdapter Channel 0 Perc RAID adapter channel Pin connectors Pin connectors Cabling Your Cluster HardwareCabling Your Public and Private Networks Network Connections DescriptionCabling Your Public Network Private network adapter Cluster nodeCabling Your Private Network NIC TeamingPrivate Network Hardware Components and Connections Method Power Cabling for the PowerEdge Cluster SE500W Solution Cabling the Mouse, Keyboard, and MonitorPage Power Cabling Example With One Power Supply in the Systems Power Cabling Example With Two Power Supplies in the Systems Cabling Your Cluster Hardware Preparing Your Systems for Clustering Before You BeginPreparing Your Systems for Clustering Installation Overview Configuring the Cluster Nodes as Domain Controllers Selecting a Domain ModelConfiguring the Internal Drives in Your Cluster Nodes Installing and Configuring the Windows Operating SystemPreparing Your Systems for Clustering Configuring Windows Networking Configuring IP Addresses for the Private Network Dell recommends using static IP addresses for your clusterHas been corrected in Windows Server Preparing Your Systems for Clustering Configuring the Internet Connection Firewall Verifying Cluster Network CommunicationsInstalling the Perc RAID Adapters Updating the Windows Driver for the Perc RAID AdapterInstalling and Configuring the Shared Storage System Clustering PowerVault Storage SystemsSplit-Bus Module Primary Split-bus ModulePage EMM serves two primary functions in your storage system Enclosure Management Module EMMPreparing the Perc RAID Adapter for Clustering Enabling the Cluster Mode Using the Perc RAID Adapter Setting the Scsi Host Adapter IDsConfiguring and Managing Virtual Disks Naming and Formatting Drives on the Shared Storage SystemAssigning Drive Letters and Mount Points EmailData Installing and Configuring Mscs Verifying Cluster ReadinessConfiguring Cluster Networks Running Windows Creating the Quorum ResourceConfiguring Cluster Networks Running Windows Server Preparing Your Systems for Clustering Adding Cluster Nodes Using the Advanced Configuration Option Verifying Mscs Operation Installing Applications in the Cluster GroupVerifying Cluster Functionality Verifying Cluster Resource AvailabilityTroubleshooting Failed Resources Obtaining More InformationLaunching Cluster Administrator on a Cluster Node Installing Your Cluster Management SoftwareMicrosoft Cluster Administrator Running Cluster Administrator on a Remote ConsoleLaunching Cluster Administrator on a Remote Console Cluster Objects Using MscsUsing Mscs Cluster NetworksPreventing Network Failure Network InterfacesCluster Nodes Node-to-Node CommunicationForming a New Cluster Joining an Existing ClusterGroups Cluster ResourcesSetting Resource Properties Dependent ResourcesConfiguring Resource Dependencies Setting Advanced Resource PropertiesCluster Resources and Required Dependencies Resources and Configurable Parameters Resource ParametersQuorum Disk Quorum Resource Resource Failure Adjusting the Threshold and Period Values Creating a New ResourceDeleting a Resource File Share Resource TypeConfiguring Active and Passive Cluster Nodes Failover and FailbackFailover Using Mscs Failback Using Mscs Upgrading Your System to a Cluster Configuration Certification RequirementsUpgrading Your System to a Cluster Configuration Configurations Using Non-Dell ProductsCompleting the Upgrade Upgrading Your Operating SystemPerforming a Rolling Upgrade Before you perform a rolling upgradeUpgrading Node Maintaining Your Cluster Adding a Network Adapter to a Cluster NodeMaintaining Your Cluster IP address Maintaining Your Cluster Removing Nodes From Clusters Running Windows Server Running chkdsk /f on a Quorum DiskRecovering From a Corrupt Quorum Disk Replacing a Cluster-Enabled Dell Perc RAID Adapter Replacing a Cluster NodeWhere clustername is the name of your cluster Reformatting a Cluster Disk Maintaining Your Cluster Rebuilding Operation in Dell OpenManage Utilities Maintaining Your Cluster Maintaining Your Cluster Troubleshooting TroubleshootingPerc 3/DC Bios Troubleshooting Viewer, see the Microsoft Cluster Service Administrator’s Guide for instructions onSupport.microsoft.com Troubleshooting Troubleshooting Abbreviations and Acronyms Abbreviations and AcronymsGUI NLB RAM Abbreviations and Acronyms PowerEdge Cluster SE500W Solution Data Form Cluster Data FormCluster Data Form Node Server Type Cluster Name Service Tag Number Server Name System StorageComponent Storage Dell PowerVault Description of Installed ItemsDrive letters, RAID types, applications/data Storage, internal drivesW . d e l l . c o m s u p p o r t . d e l l . c o m Index IndexMscs Replacing a cluster-enabledcard Shared storage system configuring, 39 enclosure managementVirtual disks, 45 using dynamic disks Index PowerVault 22 xS Back Panel Example of Network Cabling ConnectionPage Table A-1 General Cluster Troubleshooting
Related manuals
Manual 10 pages 46.64 Kb

SE500W specifications

The Dell SE500W is a remarkable addition to the realm of productivity-focused monitors. Designed to meet the demands of both office environments and versatile home setups, this monitor offers a blend of cutting-edge technology and user-friendly features.

One of the standout characteristics of the SE500W is its stunning display quality. The monitor boasts a Full HD resolution of 1920 x 1080 pixels, delivering crisp and vibrant visuals. This makes it ideal for various tasks, whether you are editing photos, watching videos, or working on extensive spreadsheets. The IPS panel provides wide viewing angles, ensuring consistent color accuracy and clarity from virtually any position.

Another key feature of the Dell SE500W is its ergonomic design. The monitor is equipped with a flexible stand that allows for height adjustment, tilt, and swivel capabilities. This adaptability ensures that users can customize their viewing experience to minimize neck and eye strain during long hours of use. Furthermore, the monitor includes VESA mount compatibility, providing additional options for mounting it on walls or adjustable arms.

In terms of connectivity, the Dell SE500W doesn't disappoint. It comes with multiple ports, including HDMI and DisplayPort inputs, enabling easy connections to a variety of devices such as laptops, desktops, and gaming consoles. The addition of USB ports allows users to charge devices or connect peripherals without fuss.

The SE500W also incorporates features aimed at enhancing user comfort and productivity. The Dell ComfortView technology reduces harmful blue light emissions, making it easier on the eyes during extended use. Moreover, its Flicker-Free technology helps eliminate flickering, adding another layer of comfort for users who spend significant time in front of the screen.

Energy efficiency is another important aspect of the Dell SE500W. It is designed to meet ENERGY STAR certification standards, consuming less power and being environmentally friendly. This not only helps in reducing energy bills but also lessens the carbon footprint.

Overall, the Dell SE500W is a solid choice for anyone seeking a reliable and versatile monitor. With its impressive display, ergonomic features, extensive connectivity options, and focus on user comfort, it stands out as a well-rounded monitor for both professional and casual use. Whether for productivity tasks or entertainment, the SE500W is poised to enhance the user experience significantly.
Top Page Image Contents