Dell E03J001, E04J001, E04J Series, E03J Series owner manual Removing the Control Panel

Control Panel

Removing the Control Panel

1Turn off the enclosure and host server.

2Disconnect all the power cables connected to the enclosure.

3Remove the hard drives from:

–slots 0 to 2 in PowerVault MD1200

–slots 0 to 5 in PowerVault MD1220

See "Removing a Hard Drive" on page 31.

NOTE: Mark each hard drive with it’s slot position as you remove it.

4Slide the control panel out of the chassis after:

–Pushing the release tab toward the front of the enclosure in PowerVault MD1200. See Figure 3-11.

–Pulling the release pin toward the front of the enclosure in PowerVault MD1220. See Figure 3-12.

42

Installing Enclosure Components