Dell E03J Series, E04J001, E04J Series, E03J001 owner manual Installing the Backplane

Installing the Backplane

1Align the holes on the backplane with the holes on the enclosure.

2Tighten the captive screw to secure the backplane to the chassis. See Figure 3-14 for PowerVault MD1200 or Figure 3-15 for PowerVault MD1220.

3Replace the screws that secure the backplane to the chassis. See Figure 3-14 for PowerVault MD1200 or Figure 3-15 for PowerVault MD1220.

4Align the slots on the EMM/power supply cage with the tabs on the chassis. See Figure 3-13.

5Push the EMM/power supply cage toward the front of the enclosure.

6Replace the screws that secure the EMM/power supply cage to the chassis.

7Replace the control panel. See "Installing the Control Panel" on page 44.

8Replace the power supply/cooling fan modules. See "Installing a Power Supply/Cooling Fan Module" on page 41.

9Replace the hard drives. See "Installing a Hard Drive" on page 32.

10Connect all the cables to the enclosure.

11Turn on the enclosure and the host server.

Installing Enclosure Components

47