Black Box LES431A, Modbus Hardened Serial Server manual Specifications

Page 6

Chapter 1: Specifications

1. Specifications

General Specifications

Approvals

FCC Part 15, Class A, CE, NEMA TS2, UL® Class 1, Division 2, Groups A, B, C, and D

 

 

Compatible

Windows® XP (32/64 bit), 2003 Server (32/64 bit), Windows Vista® (32/64 bit),

Operating Systems

2008 Server (32/64 bit), Windows 7 (32/64 bit)

 

 

Configuration

Via serial port using Modbus Hardened Serial Server Software, via network using Modbus Hardened Serial

Options

Server Software with an Ethernet connection or a standard Web browser such as Internet Explorer® 7, 8, or 9,

 

or Firefox® 3 or 4

 

 

Enclosure

Rating: IP30;

 

Mounting: DIN rail mount (35 mm)

 

 

User Controls

(1) Reset button

 

 

Connectors

(1) DB9 M, (1) 5-pin terminal block, (1) RJ-45, (1) 2-position pluggable terminal block for power

 

 

Indicators

(3) LEDs: (1) Ready, (1) Serial, (1) Ethernet Link

 

 

Temperature

Operating: -40 to +176° F (-40 to +80° C);

Tolerance

Storage: -40 to +185° F (-40 to +85° C);

 

Maximum Ambient Surrounding Air Temperature: 176° F (80° C)

 

 

Operating

10 to 95%, noncondensing

Humidity

 

 

 

Power

Voltage requirements: 10 to 48 VDC (58 VDC max.) extermal power supply;

 

Consumption: 4.0 watts maximum;

 

Terminal blocks: Wire size: 28 to 16 AWG,

 

Wire Type: Copper wire only,

 

Tightening Torque: 5 kg-cm,

 

Wire Temperature Rating: 105° C minimum, sized for 60° C ampacity

 

NOTE: One conductor per terminal.

 

 

Dimensions

1.2"H x 3.3"W x 4.7"D (4.6 x 12.2 x 17.1 cm)

 

 

Serial Interface Specifications

Baud Rates

75, 150, 300, 600, 1200, 2400, 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400

 

 

Data Bits

5, 6, 7, 8

 

 

Flow Control

None, RTS/CTS, X-ON/X-OFF

 

 

Mode Selection

RS-232/422/485 software-selectable

 

 

Parity

None, even, odd, mark, space

 

 

RS-232 Lines

TXD, RXD, RTS, CTS, DTR, DSR, DCD, GND

 

 

RS-422 Lines

TXDA(-), TXDB(+), RXDA(-), RXDB (+), GND

 

 

RS-485 (2-Wire)

Data(-), Data(+), GND

 

 

RS-485 (4-Wire)

TXDA(-), TXDB(+), RXDA(-), RXDB (+), GND

 

 

RS-422/485 Biasing

Auto 4.7 K-ohm pullups and pulldowns

 

 

RS-422/485

Auto termination with through hole (user supplied)

Termination

 

 

 

RS-485 Data

Auto control via MCU

Control

 

 

 

Stop Bits

1, 1.5, 2

 

 

Page 6

724-746-5500 blackbox.com

Image 6
Contents Modbus Hardened Serial Server Trademarks Used in this Manual Trademarks Used in this ManualFCC and IC RFI Statements NOM Statement Table of Contents Specifications SpecificationsSpecifications Dimensional Diagrams Overview Introduction FeaturesOverview What‘s IncludedLES431A front and back panels Modbus Hardened Serial Server Configuration Software LES431A components1 RS-232 Installation and Initial SetupInstallation and Initial Setup Connecting the Power Supply 2 RS-422Connecting Modbus Hardened Serial Servers to a Network Modbus Hardened Serial Server Configuration ConnectionsModbus License Acceptance Screen Installation and Initial Setup Software Installing screen 10. Installation Complete screen Installation and Initial Setup Installation and Initial Setup Installation and Initial Setup See the General Settings screen in Figure Installation and Initial Setup Installation and Initial Setup Installation and Initial Setup Installation and Initial Setup Installation and Initial Setup Installation and Initial Setup Installation and Initial Setup Installation and Initial Setup Installation and Initial Setup Installation and Initial Setup 29. Type IP Address 31. Web properties screen Installation and Initial Setup Null-modem Cable Modbus Hardened Serial Server LES431A 35. Serial Port Selection Reloading Factory Defaults 36. Direct IP ConnectionUpgrading the Modbus Hardened Serial Server Firmware Upgrading the Modbus Hardened Serial Server FirmwareDownloading Firmware Files Uploading the Firmware to the Modbus Hardened Serial Server Diagnostics DiagnosticsTesting a Modbus Hardened Serial Server Connection Testing a Modbus Hardened Serial Server connection Application Examples Application ExamplesEthernet Master and Serial Slaves Application Examples Application Examples Modbus ID routing Modbus priority Serial and Ethernet Masters, Serial and Ethernet Slaves Port 1 ModbusModbus Slave ID routing Serial Masters, IP Slaves 11. Port 1 Serial12. Port 1 Modbus Identical Hard-Coded Slaves Identical Production LinesModbus Help Modbus Help Modbus ASCII/RTU BasicsHints and Tips Appendix a Default Modbus Hardened Serial Server Settings Appendix A. Default Modbus Hardened Serial Server SettingsAppendix B Connector Pinouts Appendix B. Connector Pinouts DB9 M ConnectorTerminal Block Standard Ethernet Cable RJ-45 Pinout Appendix C Glossary Appendix C. GlossaryBlackbox.com Blackbox.com Blackbox.com Black Box Tech Support FREE! Live /7