Chapter 6 - Basic Configuration Guide | 29 |
|
|
Suggested for IP
These parameters help supply information about the segment that the interface is connected to. With this information, routing can take place.
•Set IP RIP 1, IP RIP 2, OSPF (Open Shortest Path First) or BGP (Border Gateway Protocol)
•IP static routes
CV: Use the TCP/IP Routing: WAN Dialog Box to set RIP, and the IP Static Routing Dialog Box (under Global/IP Static Routes) to set static routes. OSPF and BGP can only be configured using text- based configuration.
TB: Use configure and set either the RIPVersion keyword or the OSPFEnabled keyword in the IP WAN 0 (and/or other port numbers you wish to configure) section. Add static routes and a default router using the edit config IP Static command.
ϖNote: Due to the complexity of BGP, configuration parameters for BGP are not given here. Compatible Systems has posted a BGP config- uration guide in the Technical Support section of our Web site at: http:// www.compatible.com/.
IPX Protocol
Required for IPX
Frame Relay operation requires that the WAN interface is set to be a "numbered interface." This means that the interface (and thus the Frame Relay network) must have an IPX network number.
•IPX numbered interface
•IPX network number
CV: Use the IPX Routing: WAN Dialog Box.
TB: Use configure and set the Numbered and Net keywords in the IPX WAN 0 (and/or other port numbers you wish to configure) section.
Suggested for IPX
The settings above are all that is generally required for IPX operation over Frame Relay.